Thanks for the reply ..
Il have to get some orderd up.
Mr2 Turbo Sprint Car (Banshee)
Moderators: IMOC Moderators, IMOC Committee Members
Re: Mr2 Turbo Sprint Car (Banshee)
no problem
let me know how they go in as the ones i had were a pain in the
let me know how they go in as the ones i had were a pain in the
Re: Mr2 Turbo Sprint Car (Banshee)
managed to get the Banshee ready for Werrington Park today.
Had a fantastic day,managed to be the quickest car in class in first practice in the rain not sure what the 4wd guys thought
Anyway i knew that wouldn't last but did manage 3rd in class fractions behind 2 400-450+bhp scoob's
while im still on stock ecu
so here's a vid.
http://www.youtube.com/watch?v=cFMDbpK3 ... 5V6nDn5naA
Had a fantastic day,managed to be the quickest car in class in first practice in the rain not sure what the 4wd guys thought
Anyway i knew that wouldn't last but did manage 3rd in class fractions behind 2 400-450+bhp scoob's
while im still on stock ecu
so here's a vid.
http://www.youtube.com/watch?v=cFMDbpK3 ... 5V6nDn5naA
Re: Mr2 Turbo Sprint Car (Banshee)
Brief engine spec list?
Nice to see someone giving it some serious beans!
Looks like your reving behond stock rev limit tho to be on a stock ecu? 7.5+k rpm? Perhaps am just reading it wrong. :-/
Nice to see someone giving it some serious beans!
Looks like your reving behond stock rev limit tho to be on a stock ecu? 7.5+k rpm? Perhaps am just reading it wrong. :-/
Re: Mr2 Turbo Sprint Car (Banshee)
stephano wrote:managed to get the Banshee ready for Werrington Park today.
Had a fantastic day,managed to be the quickest car in class in first practice in the rain not sure what the 4wd guys thought
Anyway i knew that wouldn't last but did manage 3rd in class fractions behind 2 400-450+bhp scoob's
while im still on stock ecu
so here's a vid.
http://www.youtube.com/watch?v=cFMDbpK3 ... 5V6nDn5naA
Very nice!! Good job dude
-
- Posts: 4789
- Joined: Thu Nov 24, 2011 1:01 pm
- Contact:
Re: Mr2 Turbo Sprint Car (Banshee)
Good skills sir
Watching you through some of those corners made me clench
Watching you through some of those corners made me clench
-
- Posts: 148
- Joined: Thu Mar 15, 2012 2:41 pm
- Location: Launceston
Re: Mr2 Turbo Sprint Car (Banshee)
got to see a couple of runs was a good day now whens the next race
Re: Mr2 Turbo Sprint Car (Banshee)
jimGTS wrote:Brief engine spec list?
Nice to see someone giving it some serious beans!
Looks like your reving behond stock rev limit tho to be on a stock ecu? 7.5+k rpm? Perhaps am just reading it wrong. :-/
its a stock rev3 ecu but rev limit is raised by 250rpm
got 8:1 comp wossner's
stock rods, crank etc
274 cams
cheap crappy t3/4 turbo as wanted to test my antilag on it when its running.
side exit exhaust
charge cooler
drilled out fuel rail
stock injectors
044 pump
-8 fuel lines
running about 10psi boost peaks at 14-15 when cams come in, but not set them up right yet.
just starts to lean out at 7 to 7.5k rpm as guessing the injectors are maxing out.
Re: Mr2 Turbo Sprint Car (Banshee)
ashley wrote:
Very nice!! Good job dude
Thank you.
Re: Mr2 Turbo Sprint Car (Banshee)
Magic Beans wrote:Good skills sir
Watching you through some of those corners made me clench
yeah got a bit braver today
hit those final little bends flat out.
Re: Mr2 Turbo Sprint Car (Banshee)
june is my next one so got time to do some bits.sketchmyster wrote:got to see a couple of runs was a good day now whens the next race
Re: Mr2 Turbo Sprint Car (Banshee)
Good vid dude.
-
- Posts: 148
- Joined: Thu Mar 15, 2012 2:41 pm
- Location: Launceston
Re: Mr2 Turbo Sprint Car (Banshee)
sounds good june it is then lol
Re: Mr2 Turbo Sprint Car (Banshee)
RedMR² wrote:Good vid dude.
Cheers.
Re: Mr2 Turbo Sprint Car (Banshee)
stephano wrote:jimGTS wrote:Brief engine spec list?
Nice to see someone giving it some serious beans!
Looks like your reving behond stock rev limit tho to be on a stock ecu? 7.5+k rpm? Perhaps am just reading it wrong. :-/
its a stock rev3 ecu but rev limit is raised by 250rpm
got 8:1 comp wossner's
stock rods, crank etc
274 cams
cheap crappy t3/4 turbo as wanted to test my antilag on it when its running.
side exit exhaust
charge cooler
drilled out fuel rail
stock injectors
044 pump
-8 fuel lines
running about 10psi boost peaks at 14-15 when cams come in, but not set them up right yet.
just starts to lean out at 7 to 7.5k rpm as guessing the injectors are maxing out.
How's rev limit raised out of curiosity?
What ever the crappy turbo is must be doing alright to take that abuse.
Sounds like a cheap 'good' turbo to me. But guess your not running big boost.
Re: Mr2 Turbo Sprint Car (Banshee)
ashley wrote:stephano wrote:managed to get the Banshee ready for Werrington Park today.
Had a fantastic day,managed to be the quickest car in class in first practice in the rain not sure what the 4wd guys thought
Anyway i knew that wouldn't last but did manage 3rd in class fractions behind 2 400-450+bhp scoob's
while im still on stock ecu
so here's a vid.
http://www.youtube.com/watch?v=cFMDbpK3 ... 5V6nDn5naA
Very nice!! Good job dude
And now with Rev 1 sub frame
Designer for turbo set ups on F1 cars, and Nitrous Oxide Systems of the USA in the 80s
Re: Mr2 Turbo Sprint Car (Banshee)
Have you received your suspension kit from Alex yet? Got my rev 1 subframe in the garage ready for paint- just waiting on a delivery from the US
Re: Mr2 Turbo Sprint Car (Banshee)
no not yet mate still waiting.
thought id fit the sub frame anyway and it is GOOD!
didn't realise it would be that much better but its such an improvement over the lazy characteristics of the rev2
thought id fit the sub frame anyway and it is GOOD!
didn't realise it would be that much better but its such an improvement over the lazy characteristics of the rev2
Re: Mr2 Turbo Sprint Car (Banshee)
Excellent- good feedback
-
- Posts: 4789
- Joined: Thu Nov 24, 2011 1:01 pm
- Contact:
Re: Mr2 Turbo Sprint Car (Banshee)
What is it about the rev1 version which makes it better? Is it stiffer or heavier etc?