Looks good.
Here are some of pics of the OEM stuff the company am using do:
http://www.imoc.co.uk/forums/album_pic.php?pic_id=1126
http://www.imoc.co.uk/forums/album_pic.php?pic_id=1125
Cheers
All bits Carbon Fibre
Moderators: IMOC Moderators, IMOC Committee Members
Re: All bits Carbon Fibre
Doors please, probably dash too but i really can't see that one working...
Greddy lip in carbon would be a bad idea imo. I'm forever catching mine and my car isn't that low. It'd just be too depressing.
Greddy lip in carbon would be a bad idea imo. I'm forever catching mine and my car isn't that low. It'd just be too depressing.
-
- Posts: 134
- Joined: Thu Jan 06, 2005 12:10 am
- Location: London, UK
Re: All bits Carbon Fibre
hi mate,
If its a standard turbo engine lid in carbon fibre, price dependent, i am provisionally interested.....note.... price dependent!
cheers
If its a standard turbo engine lid in carbon fibre, price dependent, i am provisionally interested.....note.... price dependent!
cheers
Re: All bits Carbon Fibre
how much will the doors be?
SW20 Rev1 Supercharged 2GR-FE Powered Trackday Car.
Re: All bits Carbon Fibre
monkeyra wrote:how much will the doors be?
If the doors come in at less than £500 each i'll be well impressed.
Re: All bits Carbon Fibre
I could be up for some T-Bars dependant on price, and the the fact that they provide a factory level seal to the car. Wouldn't want air and water to be flowing an 10mm gap now would I!
Re: All bits Carbon Fibre
jonb- wrote:Doors please, probably dash too but i really can't see that one working...
You'd be suprised. I should've taken a picture if their rear diffuser on one of their race cars. I'll try and get a picture when am over there this weekend.
jonb- wrote:Greddy lip in carbon would be a bad idea imo. I'm forever catching mine and my car isn't that low. It'd just be too depressing.
Your probably right...i just gave people the option.
Thanks
M5
Re: All bits Carbon Fibre
trd2000mr2 wrote:hi mate,
If its a standard turbo engine lid in carbon fibre, price dependent, i am provisionally interested.....note.... price dependent!
cheers
Hi Mate...
yes it'll be standard OEM turbo engine lid in carbon fibre. I've added you to the list.
M5
Re: All bits Carbon Fibre
monkeyra wrote:how much will the doors be?
I have no idea at the moment. As soon as i manage to source some, i'll take them around.
Cheers
M5
Re: All bits Carbon Fibre
Steve W2 wrote:I could be up for some T-Bars dependant on price, and the the fact that they provide a factory level seal to the car. Wouldn't want air and water to be flowing an 10mm gap now would I!
LOL...if they allow air and water in, i wouldn't sell them to the public. I'd ensure they give a factory seal. However saying this, it has alot to do with the condition of your factory seals.
Just a note on the T-Bars. They will only replace the glass bit. It will be upto you to strip the handles, sliders, rods from your existing T-Bars and install on the carbon fibre T-Bars.
Cheers
M5
Re: All bits Carbon Fibre
im trying to set up a couple of other group buys for carbon items depending on cost of your company we could possibly merge them all.
Im setting up the folliwing;
broder replica front wings (vented and wider)
border front bonnet (with vents)
standard boot / tailgate
vented engine lid
possibly autopista spoiler (upper and lower - to match with boot)
possibly bomex side air scoops (both sides)
possibly rear window wrap around
possibly rev6 front and rear light (plastic surroundings)
Im setting up the folliwing;
broder replica front wings (vented and wider)
border front bonnet (with vents)
standard boot / tailgate
vented engine lid
possibly autopista spoiler (upper and lower - to match with boot)
possibly bomex side air scoops (both sides)
possibly rear window wrap around
possibly rev6 front and rear light (plastic surroundings)
Re: All bits Carbon Fibre
V8Killer wrote:Steve W2 wrote:I could be up for some T-Bars dependant on price, and the the fact that they provide a factory level seal to the car. Wouldn't want air and water to be flowing an 10mm gap now would I!
LOL...if they allow air and water in, i wouldn't sell them to the public. I'd ensure they give a factory seal. However saying this, it has alot to do with the condition of your factory seals.
Just a note on the T-Bars. They will only replace the glass bit. It will be upto you to strip the handles, sliders, rods from your existing T-Bars and install on the carbon fibre T-Bars.
Cheers
Thanks Mr Killer, I thought I'd have to strip the T-Bar I understand that the seals in my car will make a difference, just thought I'd mention it so I don't end up with an expensive pair of fruit bowls
By the way there's a pair of doors going on eBay for £29.99 eaxh IIRC?
-
- Posts: 134
- Joined: Thu Jan 06, 2005 12:10 am
- Location: London, UK
Re: All bits Carbon Fibre
V8Killer wrote:trd2000mr2 wrote:hi mate,
If its a standard turbo engine lid in carbon fibre, price dependent, i am provisionally interested.....note.... price dependent!
cheers
Hi Mate...
yes it'll be standard OEM turbo engine lid in carbon fibre. I've added you to the list.
Cool, sounds good,
Any rough guestimates on price???
Cheers
Re: All bits Carbon Fibre
Just an update.
I have sourced the driver and passenger doors out my own pocket to make this happen. I need you guys to back me up now!
The doors will be just be a totally stripped out OEM door. No door cards, no windows, etc etc. It'll be your responsibility to get all this off your existing door and put them onto the carbon fibre door.
So far people interested in CF doors are:
v8killer
cjones2
mr2lover
jonb
Am trying to go down this week depending on how many of the different parts i can get, otherwise it'll be next weekend.
Hopefully i'll have an accurate price by then too.
Muhsin
I have sourced the driver and passenger doors out my own pocket to make this happen. I need you guys to back me up now!
The doors will be just be a totally stripped out OEM door. No door cards, no windows, etc etc. It'll be your responsibility to get all this off your existing door and put them onto the carbon fibre door.
So far people interested in CF doors are:
v8killer
cjones2
mr2lover
jonb
Am trying to go down this week depending on how many of the different parts i can get, otherwise it'll be next weekend.
Hopefully i'll have an accurate price by then too.
Muhsin
M5
Re: All bits Carbon Fibre
Mk1 T-bar panels sound good.... and I've got a spare set I can take to pieces
Re: All bits Carbon Fibre
possibly autopista spoiler (upper and lower - to match with boot)
I'd be interested in that if the price is right
Re: All bits Carbon Fibre
jrleech wrote:Mk1 T-bar panels sound good.... and I've got a spare set I can take to pieces
Hi John,
Toni has offered to send me some, hopefully by next weekend sometime. So watch this space.
Cheers
M5
Re: All bits Carbon Fibre
RichLee wrote:possibly autopista spoiler (upper and lower - to match with boot)
I'd be interested in that if the price is right
Get me 10 people and i'll do it.
Cheers
M5
Re: All bits Carbon Fibre
V8Killer wrote:
Hi John,
Toni has offered to send me some, hopefully by next weekend sometime. So watch this space.
Cheers
Like a hawk