Anyone know where to get Roll center adjusters from (but not the crazy priced Phoenix Power ones)?
Also - do Camber crash bolts do the same job?
[Mk2] [Generic] Roll center adjusters & camber crash bolts.....
Moderators: IMOC Moderators, IMOC Committee Members
Re: [Mk2] [Generic] Roll center adjusters & camber crash bolts.....
I suggest reading these posts about Roll Centre Adjusters if you have not already done so before deciding to use them;
http://www.imoc.co.uk/forums/viewtopic.php?t=66912
http://www.imoc.co.uk/forums/viewtopic.php?t=2427
Any decent machinist could make some up for you at less cost than the commercially available ones I've seen but they wouldn't be anodised.
http://www.imoc.co.uk/forums/viewtopic.php?t=66912
http://www.imoc.co.uk/forums/viewtopic.php?t=2427
Any decent machinist could make some up for you at less cost than the commercially available ones I've seen but they wouldn't be anodised.
Re: [Mk2] [Generic] Roll center adjusters & camber crash bolts.....
After our succes with the swaybar plates, MR2Gen3Turbo and I will offer a RCA-Set, soon!
Re: [Mk2] [Generic] Roll center adjusters & camber crash bolts.....
please do - they are simple design and i would love a set!
-
- Posts: 3103
- Joined: Wed Oct 12, 2005 6:03 pm
- Location: Fenny Compton (Warwickshire)
- Contact:
Re: [Mk2] [Generic] Roll center adjusters & camber crash bolts.....
Has anyone got a picture of these items?
Nathan
Nathan
Builders of the the UK's first 9second MR2 - 9.722 @ 148 MPH ----- 07947883103 ---- www.centurymotorsport.com
Re: [Mk2] [Generic] Roll center adjusters & camber crash bolts.....
i drew these up and my friend Nick (mrgen3turbo) had them manufactured.
these are the ones ppl are mentioning above. we have a stock pile of these here.
these are the ones ppl are mentioning above. we have a stock pile of these here.
Re: [Mk2] [Generic] Roll center adjusters & camber crash bolts.....
The RCA should really have a 'shoulder' to fit into the hub (as per the ball joint) and a recess to accept the lower ball joint's shoulder. The hub is such a soft metal you do not want to be relying on the bolts alone.
-
- Posts: 74
- Joined: Wed Jul 30, 2008 10:24 am
- Location: Melbourne, Australia
Re: [Mk2] [Generic] Roll center adjusters & camber crash bolts.....
As per Kameleons comments I have produced a small number of these for use on front and rear of SW20 MR2s. Also I have a few pairs of front camber adjusting pairs. I have been using these myself for ages now and unlike sprinters, AW11's and Nissan S15's a shoulder is not required on SW20 MR2's
These have been produced in 6061 grade CNC machined anodised aluminium.
I have a couple of pairs of front camber adjusting version as per pics.
Can send to those interested directly from Australia or if there is sufficient quantity via my distributor in Germany.
They make a huge difference to the handling of SW20's especially on bumpy uneven camber and surface roads.
I'll post a group buy thread soon but as i said I only have a few sets so I expect to sell these soon.
Pricing is 170 pounds per set of four (two front and two rear) including bolts and washers - postage extra but these are fairly lightweight.
Compare to ex Japan prices!
Questions please PM me.
edit btw these do not fit standard 15" rear rims - minmum 16" rear required.
RCA's fitted to right side of car - notice difference in geometry of right side arm
These have been produced in 6061 grade CNC machined anodised aluminium.
I have a couple of pairs of front camber adjusting version as per pics.
Can send to those interested directly from Australia or if there is sufficient quantity via my distributor in Germany.
They make a huge difference to the handling of SW20's especially on bumpy uneven camber and surface roads.
I'll post a group buy thread soon but as i said I only have a few sets so I expect to sell these soon.
Pricing is 170 pounds per set of four (two front and two rear) including bolts and washers - postage extra but these are fairly lightweight.
Compare to ex Japan prices!
Questions please PM me.
edit btw these do not fit standard 15" rear rims - minmum 16" rear required.
RCA's fitted to right side of car - notice difference in geometry of right side arm
MR2 sticks like glue
Re: [Mk2] [Generic] Roll center adjusters & camber crash bolts.....
I'll be interested in these if you do a group buy
'02 VX220 2.2 n/a Daily driver - Exige Size TD 1.2 - TAT shorty Diffuser - HardTop - Chris Tullet 4-1 Manifold.
'97 mk1 Mazda Eunos Turbo track car with 260bhp/ton - soon more as Chris Wilsons going to build me an engine over the winter ) .
'97 mk1 Mazda Eunos Turbo track car with 260bhp/ton - soon more as Chris Wilsons going to build me an engine over the winter ) .
Re: [Mk2] [Generic] Roll center adjusters & camber crash bolts.....
Yeah me too. Keep us posted.
-
- Posts: 296
- Joined: Wed Feb 13, 2008 2:43 pm
- Location: germany
Re: [Mk2] [Generic] Roll center adjusters & camber crash bolts.....
if anyone is interessted in my phoenix power ones?i have a complete set for sell 100 pounds is the price which should be cheapest available.
let me know.
Dan
let me know.
Dan