[Mk2] [Turbo] My Engine Rebuild

[cantfindausername]

Yeah my favorite are CP pistons going from all the feedback I've read about various pistons. And what I personally run.

Ferrea are the valves you want, but I really wouldn't bother. Just clean up the stock ones and make sure its all shimmed correctly.

[LuizeGT]

so cp pistons it is then. Im looking at cams so thought id need valves. Wud stock rev2 cams and valves make it then?

[cantfindausername]

No, You'll need a set of 264 cams at least. Could always go custom though as they work out no more expensive.

It all depends how thorough you want to be. Minimum you'll need is the cams and to make sure the valves/lifters are shimmed to the right clearence. And Re-grind the valves into the head to ensure a good seal. However, I would probaly recommend getting some uprated valve springs as well.

[SFLee]

also add FPR
may be oil cooler

[cantfindausername]

oil cooler would be overkill personally.

Definately FPR though as will be required for tuning.

[SFLee]

hehe
but when i running higer bhp then i would want more oil in my system
beside i think she will track it, i dont see her using that built just for the road .

[cantfindausername]

yeah it definately depends on the planned useage. Oil that is too cooled is no good.

[prosser]

just so you know my engine is stripped down and ready to be checked and worked on photos so far

[LuizeGT]

will be on drag strips but not really into tracking as i dont want to risk writting it off lol

[Frustrated Pilot]

LOOK .... there is my engine in the background...

the red one

[cantfindausername]

will be on drag strips but not really into tracking as i dont want to risk writting it off lol

Wouldn't worry about an oil cooler then.

[prosser]

LOOK .... there is my engine in the background...

the red one

not unless yours is white aswell and comes out of a nissan

[LuizeGT]

got cp forgies now, eagle conrods on way.
getting fidanza flywheel, which clutch? seen the fizanza kevlar ones.... any experience with them?

[LuizeGT]

my spelling is terrible lol i ment fidanza

[LuizeGT]

also decided to get an oil cooler as i miiiiight just take her around the track once in a while lol

[Ryan S]

LOOK .... there is my engine in the background...

the red one

not unless yours is white aswell and comes out of a nissan

looks like an sr20, or rb26/25!!!

[EarL]

Err... I think you'll find an extra 2 cylinders on an RB series engine mate.

[Frustrated Pilot]

I just like big Engines ....

[Ryan S]

Err... I think you'll find an extra 2 cylinders on an RB series engine mate.

can't tell from pic, hence saying sr or rb.

i'm fairly clued up on nissans mate

[EarL]

err... so the 4 ports showing on the side of the head aren't a givaway then?

Oh well...