90 degree bends

[tubby_mr2]

where could i get some 90 bends from so i could make up some intercooler pipes up for the 2, without paying silly money for em?

[tonyrev3]

what sort of pipe u using? any exhaust shop will have a bender.

[fearless]

i see your in essex burtons down the a12 sell pipework for exhausts in a range of sizes and bends, i bought a stainless bit for an induction kit i made otherwise go to an exhaust maker and buy some off cuts and get him to bend them for you, flow tec are in essex

https://www.burtonpower.com/product_main.aspx?home.aspx

[tubby_mr2]

do you know the intercooler pipe diameter i need by any chance?

[fearless]

sorry im an n/a driver invest in a digital caliper you get them from maplins measure your pipe or intercooler with it and go from their very usefull bit of kit a digital caliper used mine for lots of car stuff

here you go this is what i bought had mine about 3 years now good for measuring nuts and things to order right sockets and spanners and threads and stuff

http://www.maplin.co.uk/Module.aspx?ModuleNo=219149

[toxo]

any exhaust shop will have a bender.

good for measuring nuts

Huhuhuhuhuhuhuh

[fearless]

oh dear i didnt notice that good spot

[cantfindausername]

alloy racing fabrications on ebay are good, but they're welded sections rather than mandrel bent pipes.

Also depends if you want stainless or ally.

[Ryan S]

do you know the intercooler pipe diameter i need by any chance?

i know the hotpipe is 2.25 inches, think the inter cooler is the same, don't quote me though!!

[Leon.]

any exhaust shop will have a bender.

good for measuring nuts

Huhuhuhuhuhuhuh

Lol, great minds

[LimeyMk1]

www.jetex.co.uk

[tubby_mr2]

cheers people i ended up buying these http://cgi.ebay.co.uk/FRONT-MOUNT-INTER ... 240%3A1318

should do the job me thinks

[Leon.]

You 'might' want to replace the clamps, for that money they're bound to be cr@p. Just a heads up but see how they turn up

[tubby_mr2]

will do cheers leon