90 degree bends
Moderators: IMOC Moderators, IMOC Committee Members
90 degree bends
where could i get some 90 bends from so i could make up some intercooler pipes up for the 2, without paying silly money for em?
![](./images/smilies/spacer.gif)
Re: 90 degree bends
what sort of pipe u using? any exhaust shop will have a bender.![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
Re: 90 degree bends
i see your in essex burtons down the a12
sell pipework for exhausts in a range of sizes and bends, i bought a stainless bit for an induction kit i made otherwise go to an exhaust maker and buy some off cuts and get him to bend them for you, flow tec are in essex
![thumleft :thumleft:](./images/smilies/icon_thumleft.gif)
![](./images/smilies/spacer.gif)
https://www.burtonpower.com/product_main.aspx?home.aspx
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![thumleft :thumleft:](./images/smilies/icon_thumleft.gif)
![](./images/smilies/spacer.gif)
![thumleft :thumleft:](./images/smilies/icon_thumleft.gif)
![](./images/smilies/spacer.gif)
![thumleft :thumleft:](./images/smilies/icon_thumleft.gif)
![](./images/smilies/spacer.gif)
https://www.burtonpower.com/product_main.aspx?home.aspx
Re: 90 degree bends
sorry im an n/a driver invest in a digital caliper you get them from maplins measure your pipe or intercooler with it and go from their very usefull bit of kit a digital caliper used mine for lots of car stuff
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
here you go this is what i bought had mine about 3 years now good for measuring nuts and things to order right sockets and spanners and threads and stuff
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
http://www.maplin.co.uk/Module.aspx?ModuleNo=219149
![](./images/smilies/spacer.gif)
![thumleft :thumleft:](./images/smilies/icon_thumleft.gif)
![](./images/smilies/spacer.gif)
![thumleft :thumleft:](./images/smilies/icon_thumleft.gif)
![](./images/smilies/spacer.gif)
![thumleft :thumleft:](./images/smilies/icon_thumleft.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
here you go this is what i bought had mine about 3 years now good for measuring nuts and things to order right sockets and spanners and threads and stuff
![](./images/smilies/spacer.gif)
![thumleft :thumleft:](./images/smilies/icon_thumleft.gif)
![](./images/smilies/spacer.gif)
![thumleft :thumleft:](./images/smilies/icon_thumleft.gif)
![](./images/smilies/spacer.gif)
![thumleft :thumleft:](./images/smilies/icon_thumleft.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
http://www.maplin.co.uk/Module.aspx?ModuleNo=219149
-
- IMOC Committee
- Posts: 11345
- Joined: Tue May 30, 2006 5:41 pm
- Location: The Toast Aisle
- Contact:
Re: 90 degree bends
![](./images/smilies/spacer.gif)
tonyrev3 wrote:any exhaust shop will have a bender.
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
nofearmadbiker wrote:good for measuring nuts
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
Huhuhuhuhuhuhuh
![](./images/smilies/spacer.gif)
![Whistle :whistle:](./images/smilies/eusa_whistle.gif)
Re: 90 degree bends
oh dear i didnt notice that good spot
![thumleft :thumleft:](./images/smilies/icon_thumleft.gif)
![](./images/smilies/spacer.gif)
![thumleft :thumleft:](./images/smilies/icon_thumleft.gif)
![](./images/smilies/spacer.gif)
![thumleft :thumleft:](./images/smilies/icon_thumleft.gif)
![](./images/smilies/spacer.gif)
![thumleft :thumleft:](./images/smilies/icon_thumleft.gif)
-
- Posts: 9202
- Joined: Tue Dec 14, 2004 12:15 pm
- Location: Crawley, West Sussex
- Contact:
Re: 90 degree bends
alloy racing fabrications on ebay are good, but they're welded sections rather than mandrel bent pipes.
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
Also depends if you want stainless or ally.![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
Also depends if you want stainless or ally.
![](./images/smilies/spacer.gif)
-
- IMOC Moderator
- Posts: 10902
- Joined: Sat Dec 10, 2005 1:32 pm
- Location: Bonnie Dundee
- Contact:
Re: 90 degree bends
![](./images/smilies/spacer.gif)
tubby_mr2 wrote:do you know the intercooler pipe diameter i need by any chance?
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
i know the hotpipe is 2.25 inches, think the inter cooler is the same, don't quote me though!!
Re: 90 degree bends
![](./images/smilies/spacer.gif)
toxo wrote:tonyrev3 wrote:any exhaust shop will have a bender.
nofearmadbiker wrote:good for measuring nuts
Huhuhuhuhuhuhuh![]()
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
Lol, great minds
![](./images/smilies/spacer.gif)
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
Re: 90 degree bends
cheers people i ended up buying these http://cgi.ebay.co.uk/FRONT-MOUNT-INTER ... 240%3A1318
![](./images/smilies/spacer.gif)
should do the job me thinks
![Cool 8)](./images/smilies/icon_cool.gif)
![](./images/smilies/spacer.gif)
should do the job me thinks
![](./images/smilies/spacer.gif)
![Cool 8)](./images/smilies/icon_cool.gif)
![](./images/smilies/spacer.gif)
Re: 90 degree bends
You
'might' want to replace the clamps, for that money they're bound to be cr@p.
Just a heads up but see how they turn up
![thumleft :thumleft:](./images/smilies/icon_thumleft.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![thumleft :thumleft:](./images/smilies/icon_thumleft.gif)