Hi all,
Just wondered if someone could please let me know what the fuel cut should be on a Rev2?
I've installed a Blitz EBC which reads @ 1.10 kg/cm2 = 15.65psi peak before hitting fuel cut.
I always had the impression that fuel cut on a rev2 was around 13? Could it be my EBC is reading an incorrect value?
I've tried searching the web, and am getting contrasting reports.
Advice appreciated.
Cheers
[Mk2] [Turbo] Fuel cut on a rev2, according to EBC reading = 15psi?
Moderators: IMOC Moderators, IMOC Committee Members
-
- Posts: 6213
- Joined: Tue Dec 14, 2004 7:14 pm
- Location: glasgow
- Contact:
Re: [Mk2] [Turbo] Fuel cut on a rev2, according to EBC reading = 15psi?
have you checked the ECU for any wiring changes? Maybe you already have an FCD
Re: [Mk2] [Turbo] Fuel cut on a rev2, according to EBC reading = 15psi?
Hi,
When I bought the car it was listed with having a FCD, but I can't seem to see anything 'out of the norm' based near to the ECU. Could it be mounted somewhere else? General consensus seems to be it would only be in the boot.
Cheers
When I bought the car it was listed with having a FCD, but I can't seem to see anything 'out of the norm' based near to the ECU. Could it be mounted somewhere else? General consensus seems to be it would only be in the boot.
Cheers
msn - [email protected]
Re: [Mk2] [Turbo] Fuel cut on a rev2, according to EBC reading = 15psi?
Ferrit, ive got no obvious signs of a FCD on my Rev 2 and my fuel cut seems to be at 15/16 psi according to my mechanical guage.
Re: [Mk2] [Turbo] Fuel cut on a rev2, according to EBC reading = 15psi?
Hmm strange. Where abouts is your boost gauge plumbed in mate?
Is it the type of gauge that gives a vacuum reading at idle?
Is it the type of gauge that gives a vacuum reading at idle?
msn - [email protected]
Re: [Mk2] [Turbo] Fuel cut on a rev2, according to EBC reading = 15psi?
Yep, compound type.
Plumbed in at the manifold, one of the lines on the passenger side.
Plumbed in at the manifold, one of the lines on the passenger side.
Re: [Mk2] [Turbo] Fuel cut on a rev2, according to EBC reading = 15psi?
What reading of vac do you get please mate?
I'm thinking about getting a 3rd gauge, to see which reading is accurate... just hope this one reflects at least the EBC, or the mech gauge... because if it doesn't, and I get a 3rd reading, i'm not going to be happy, haha!
I'm thinking about getting a 3rd gauge, to see which reading is accurate... just hope this one reflects at least the EBC, or the mech gauge... because if it doesn't, and I get a 3rd reading, i'm not going to be happy, haha!
msn - [email protected]