Discussion and technical advice the SW20 MR2. 3S-GTE, 3S-GE, 3S-FE etc
Anything and everything to do with maintenance, modifications and electrical is in here for the Mk2.
Does anyone have pics of a black Mk2 with, black front inicators?
Cant decide between black or crystal
Also whats the best thing to get my rear lights shiney again, they are dull with polish residue etc
this is advised by lots of people on here http://cgi.ebay.co.uk/Xerapol-Plastic-P ... dZViewItem
as for black car with black indicators blz8027 i think has the black indicators and looks very nice indeed seen quite a few on here i so wanted a black t bar
hope i have helped oh t cut aswell brings up lights good
i dont know what the law is on side repeaters. ive got a spare set of orange ones anyway for the MOT but when i took it for the test the mechanic said..'if it doesnt have them then i cant fail it..if you had them and the bulbs were gone it would mean a fail'
Craigo wrote:i dont know what the law is on side repeaters. ive got a spare set of orange ones anyway for the MOT but when i took it for the test the mechanic said..'if it doesnt have them then i cant fail it..if you had them and the bulbs were gone it would mean a fail'
Vehicles first used on or after 1 April 1986 These must be fitted with one side repeater indicator on each side. Instead of a separate lamp, the side repeater might be part of the front direction indicator if it includes a wraparound lens. Acceptable wrapround lens marking
Lamps incorporating a side repeater are marked either with an 'E' mark in a circle or an 'e' mark in a rectangle above which is a number 5. Some vehicles are fitted with a wraparound lens with no European approval markings. These can be tested by standing approximately 1000mm to the side of the vehicles rear bumper with indicator on. If amber light can be seen coming through the front lens (not a reflection) this is acceptable. http://www.motuk.co.uk/manual_150.htm
Nick