Hi All,
Recently brought an MR2 with some Rimstock's on. But ive been told they aint for an MR2. because the size of the tyres are the same at the front and back.
On the Rims it says 7Jx17CH and i checked the website and it says:
7.0 x 17 Offset: e+15/18/20/25/30/38/45/50
Any Ideas? So i can flog theses on ebay to the correct vehicle
cheers PEEPS
[Mk2] [Generic] Team Dymanic RimStock Pro Race 1.2's For What car.....
Moderators: IMOC Moderators, IMOC Committee Members
-
- Posts: 203
- Joined: Sat Feb 11, 2006 9:16 pm
Re: [Mk2] [Generic] Team Dymanic RimStock Pro Race 1.2's For What car.....
The MR2 uses a staggered rim setup (rear wider than the front), and really and truly, it should be a 20% difference in size between front and rear.
Having said that, when I bought mine, it had 7 inch rims all round and was fitted with 205 tyres. Ok, so it was a little skittish, but not that mutch that you'd notice ona day to day basis, driving normally.
Those rims are normally stocked by places like Ripspeed (Halfrauds), and sold as a set with tyres.
You need to find out the offset, so that you can find what other cars they fit before selling them on.
EarL.
Having said that, when I bought mine, it had 7 inch rims all round and was fitted with 205 tyres. Ok, so it was a little skittish, but not that mutch that you'd notice ona day to day basis, driving normally.
Those rims are normally stocked by places like Ripspeed (Halfrauds), and sold as a set with tyres.
You need to find out the offset, so that you can find what other cars they fit before selling them on.
EarL.
Sable Grey 2004 MkIII Roadster
Once an MR2 owner, ALWAYS an MR2 owner!
Once an MR2 owner, ALWAYS an MR2 owner!
-
- Posts: 203
- Joined: Sat Feb 11, 2006 9:16 pm
Re: [Mk2] [Generic] Team Dymanic RimStock Pro Race 1.2's For What car.....
hi mate
the offset is e+38 ?
Cheers
the offset is e+38 ?
Cheers