[Mk2] [Generic] Team Dymanic RimStock Pro Race 1.2's For What car.....

Discussion and technical advice the SW20 MR2. 3S-GTE, 3S-GE, 3S-FE etc
Anything and everything to do with maintenance, modifications and electrical is in here for the Mk2.

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
leeharding
Posts: 203
Joined: Sat Feb 11, 2006 9:16 pm

[Mk2] [Generic] Team Dymanic RimStock Pro Race 1.2's For What car.....

Post by leeharding »

Hi All,

Recently brought an MR2 with some Rimstock's on. But ive been told they aint for an MR2. because the size of the tyres are the same at the front and back.

On the Rims it says 7Jx17CH and i checked the website and it says:

7.0 x 17 Offset: e+15/18/20/25/30/38/45/50


Any Ideas? So i can flog theses on ebay to the correct vehicle

cheers PEEPS :thumleft:



Image
EarL
Posts: 6049
Joined: Sat Dec 18, 2004 12:18 am

Re: [Mk2] [Generic] Team Dymanic RimStock Pro Race 1.2's For What car.....

Post by EarL »

The MR2 uses a staggered rim setup (rear wider than the front), and really and truly, it should be a 20% difference in size between front and rear.

Having said that, when I bought mine, it had 7 inch rims all round and was fitted with 205 tyres. Ok, so it was a little skittish, but not that mutch that you'd notice ona day to day basis, driving normally.

Those rims are normally stocked by places like Ripspeed (Halfrauds), and sold as a set with tyres.

You need to find out the offset, so that you can find what other cars they fit before selling them on. :wink:

EarL.
Sable Grey 2004 MkIII Roadster

Once an MR2 owner, ALWAYS an MR2 owner!
leeharding
Posts: 203
Joined: Sat Feb 11, 2006 9:16 pm

Re: [Mk2] [Generic] Team Dymanic RimStock Pro Race 1.2's For What car.....

Post by leeharding »

hi mate

the offset is e+38 ?

Cheers :D
Post Reply

Return to “MR2 MK2 1990 - 1999 NA & Turbo”