Mate,
the door can be adjusted by freeing off the large retainer inside the door sill and moving it
![](./images/smilies/spacer.gif)
(tap it with a wrench.
![](./images/smilies/spacer.gif)
.
![](./images/smilies/spacer.gif)
.
![](./images/smilies/spacer.gif)
it's that easy!).
![](./images/smilies/spacer.gif)
I think though that it only adjusts in/out, not sure about up/down.
![](./images/smilies/spacer.gif)
The door glass however can be adjusted up/down, backwards/forwards and in/out
![](./images/smilies/spacer.gif)
(at the top) by adjusting the guides once the door trim is off.
![](./images/smilies/spacer.gif)
Instructions and diagrams at
www.mr2dc.com in one of the technical forums there along with pt.
![](./images/smilies/spacer.gif)
no.
![](./images/smilies/spacer.gif)
for the eccentric rods which I def.
![](./images/smilies/spacer.gif)
recommend.
![](./images/smilies/spacer.gif)
I did all 3
![](./images/smilies/spacer.gif)
(door/glass/rods) and it's saved me
![](./images/smilies/spacer.gif)
£250 for new seals which Mr T told me was the only fix.
![](./images/smilies/spacer.gif)
.
![](./images/smilies/spacer.gif)
.
![](./images/smilies/spacer.gif)
.
![](./images/smilies/spacer.gif)
Good luck.
![](./images/smilies/spacer.gif)