How do you get that sound...

Posts about anything do to with modifying your car such as fitting aftermarket parts, bodykit, or tuning the engine for more performance.

Moderators: IMOC Moderators, IMOC Committee Members

dan.h

How do you get that sound...

Post by dan.h »

this sounds dumb but what is the best way to get the "doo doo dooo dooo dooo" sound? (it sounds like a robotic pigeon or something)

instead of the standerd Doosssssssshhhhh

i think it has something to do with an external wastegate?!

cheers peeps,

Danny
Paul R
Posts: 1341
Joined: Mon Dec 20, 2004 2:24 pm
Location: Nantwich

Re: How do you get that sound...

Post by Paul R »

My supra used to make that noise with a HKS ssqv dump valve......

Paul.
nutter

Re: How do you get that sound...

Post by nutter »

You need an HKS SSQV my friend! It's a replacement Blow off valve.

Like this :

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... eName=WDVW
karammander
Posts: 806
Joined: Fri Jan 21, 2005 11:27 am
Location: Aberystwyth, Wales

Re: How do you get that sound...

Post by karammander »

yeah that ssq makes that noise inbetween high and low boost valves, since there are two valves i think on the unit its the low boost and the hight boost opening and fluttering. the noise your on about i think comes either from induction from the afm or yes a performance wastgate or actuator.

cheers karam
dan.h

Re: How do you get that sound...

Post by dan.h »

ok, thats good cause the hks ssqv is to be my next upgrade.

cheers guys
dan.h

Re: How do you get that sound...

Post by dan.h »

do you guys get these fitted by pro's at a garage or is it easy to instal yourself?
Paul R
Posts: 1341
Joined: Mon Dec 20, 2004 2:24 pm
Location: Nantwich

Re: How do you get that sound...

Post by Paul R »

With the correct fitting kit, it's dead easy mate!

Save yourself 50 quid or so and do it yourself!!

Paul.
nutter

Re: How do you get that sound...

Post by nutter »

easy to install yourself. I hope Paul doesn't mind me stealing his picture :)

Right look for the blow off valve here :

Image

Basically underneath the Bov is a 10mm bolt. Undo this and the old bov comes off all you do is bolt your new bov in place (note : make sure you get the MR2 fitting kit when you buy the bov).

You will need to block the pipe coming off the old bov as well.

HTH
Paul R
Posts: 1341
Joined: Mon Dec 20, 2004 2:24 pm
Location: Nantwich

Re: How do you get that sound...

Post by Paul R »

nutter wrote:easy to install yourself. I hope Paul doesn't mind me stealing his picture :)

Basically underneath the Bov is a 10mm bolt. Undo this and the old bov comes off all you do is bolt your new bov in place (note : make sure you get the MR2 fitting kit when you buy the bov).

You will need to block the pipe coming off the old bov as well.

HTH


I dont mind mate. I stole it off someone else!! :D:D

Paul.
nutter

Re: How do you get that sound...

Post by nutter »

LOL :lol:
dan.h

Re: How do you get that sound...

Post by dan.h »

what a superb picture!

that is so usefull, thanx!

so you have to block off the re-circ pipes?
nutter

Re: How do you get that sound...

Post by nutter »

yes most definatley. Most people take the pipe off completely and block the hole in the intake hose
dan.h

Re: How do you get that sound...

Post by dan.h »

will the fitting kit supply something to block the holes off with?

thanx for all your help... :D
dan.h

Re: How do you get that sound...

Post by dan.h »

are you from dagenham?
if so, then i am only round the corner!
FizzyBlueMr2
Posts: 295
Joined: Wed Dec 22, 2004 12:51 pm
Location: South Wales

Re: How do you get that sound...

Post by FizzyBlueMr2 »

A friend of mine has a nissan 200sx, and one of the things that I do rather like about his car is the noise it makes when he eases off the throttle..

....it sort or goes Brrrr rrrrr rrrr rrr rrr rrr. Does sort of sound like a mad pigeon though, so may be the same as the above? Anyhow, it still makes a nice "whoosh" etc when he really boots is, it just tends to make the mad pigeon sound when just easing off lightly etc?

I think he has a baileys "piston" dump valve or something fitted. Would this have a similar effect to the hks ssqv? Or do the later 200sx's (his is an X reg) have something else on them that causes this? Just kinda like the noise, and was wondering what costs are involved.. ;)
Merlin
Posts: 110
Joined: Tue Dec 14, 2004 5:08 pm
Location: Frimley, Surrey
Contact:

Re: How do you get that sound...

Post by Merlin »

if u have a rev1/2 steer clear of bailys, and make sure its a HKS SSQV or a blitz, I personaly have a HKS which is great, now the noise could be the HKS BOV or indeed an external wastgate, external wastegates make a great noise, im working on a OEM manifold that can have a external gate fitted, let me know if ur not happy with a vent to atmospher BOV and I will sort you a deal out!

Regards
Rob
nutter

Re: How do you get that sound...

Post by nutter »

Hi Dan,

Yep i'm in Dagenham. Near the chequers, where are you??

Merlin is right if you have a rev 1/2 the baileys Dump valve is not a good idea. I have a rev 2 and run an HKS ssqv, i've never had any problems (apart from the odd flame from the exhaust now and again :wink: )
FizzyBlueMr2
Posts: 295
Joined: Wed Dec 22, 2004 12:51 pm
Location: South Wales

Re: How do you get that sound...

Post by FizzyBlueMr2 »

I do in fact have a rev3 turbo, so this won't be an issue. I was also just looking into what would be the likely cause of the noise and if it was possibly to replicate.

Financial decisions and sourcing will come much, much later... ;)
dan.h

Re: How do you get that sound...

Post by dan.h »

hey nutter,

i am in upminster...

do you think that the hks ssqv could be cause flames, cause my car always pops flames and is running the standerd BOV.
nutter

Re: How do you get that sound...

Post by nutter »

Cool :) You should come to the bluewater meets!

Well apparently any bov that vents to atmosphere can cause your car to run rich on the over run. I never noticed it before i fitted it !
Post Reply

Return to “Modifications”