Hi,
could anybody tell me what stark plug did Toyota use as standard on the Rev 3 turbo??
i just had a look at mine today and its got Denso VK20 iridium plugs.
and just wanted to know if they had been changed before?
i thought i read somewhere that Toyota put platinum in the turbos, is this true?
thanks
jamie
Standard spark plug
Moderators: IMOC Moderators, IMOC Committee Members
Re: Standard spark plug
yes, I think it's an NGK - BKR6EP-8 according to the NGK part finder.
Anyway, the "P" bit means platimun, and the 8 refers to the 0.8mm gap.
Hope this helps. Standard Toyota parts might not have been NGK, as Denso did all the electrics.
But NGK are decent kit. I used a copper plug in my rev3 turbo, 'cos I'm a cheap skate (BKR6-E instead) nice and cheap, £12 from Halfords. Platinums will be £12 each, but are meant to last loads longer.
ian
Anyway, the "P" bit means platimun, and the 8 refers to the 0.8mm gap.
Hope this helps. Standard Toyota parts might not have been NGK, as Denso did all the electrics.
But NGK are decent kit. I used a copper plug in my rev3 turbo, 'cos I'm a cheap skate (BKR6-E instead) nice and cheap, £12 from Halfords. Platinums will be £12 each, but are meant to last loads longer.
ian
Re: Standard spark plug
The IK20's are a high performance plug and as such, are recommended to be changed @ 30K
-
- IMOC Affiliated Trackday Organiser
- Posts: 10506
- Joined: Tue Jan 25, 2005 9:49 am
- Location: South Yorkshire
Re: Standard spark plug
High performance as in longer lasting..