hi all,
My flexi pipe is blowing... looking at it from underneath the car it looks IMMACULTE... it's blowing from inside.
Can i buy a new one ?
would a new one just be welded onto either end of the exhaust sections ?
can i just wrap it with that exhaust wrap stuff (don't know the cost of that ?)
if not how much is a new flexi section ?
appreciate any info....
thanks
Frank.
(ps. i'm guessing the innards were knackered when i had no front engine mount for a while.. along with no bracket on the downpipe - both now fixed )
can you "mend" a flexipipe ?
Moderators: IMOC Moderators, IMOC Committee Members
-
- Posts: 7069
- Joined: Thu Feb 03, 2005 5:23 pm
can you "mend" a flexipipe ?
Car now Sold damn 5th Lumber Disc !
Re: can you "mend" a flexipipe ?
A friend of mine repairs them,he removes the damaged flexi section and tig welds in a new one of the same bore size.I've had him repair quite alot of flexi joints for Jase at MTTE.He charges £75,let me know if you want yours done mate
Watch out OZ here I come !!
-
- Posts: 7069
- Joined: Thu Feb 03, 2005 5:23 pm
Re: can you "mend" a flexipipe ?
Bry wrote:A friend of mine repairs them,he removes the damaged flexi section and tig welds in a new one of the same bore size.I've had him repair quite alot of flexi joints for Jase at MTTE.He charges £75,let me know if you want yours done mate
Bry .. as EVER you are single handedly keeping me on the road (and Sane!).
nice one =D>
I got my wheels "precison balanced" today - no more Wobbling steering wheel !!
i just need to get that right rear un-buckled and then your polishing friend will need to be contacted
thanks again mate =D>
Car now Sold damn 5th Lumber Disc !
Re: can you "mend" a flexipipe ?
CosmosblueMR2 wrote:Bry wrote:A friend of mine repairs them,he removes the damaged flexi section and tig welds in a new one of the same bore size.I've had him repair quite alot of flexi joints for Jase at MTTE.He charges £75,let me know if you want yours done mate
Bry .. as EVER you are single handedly keeping me on the road (and Sane!).
nice one =D>
I got my wheels "precison balanced" today - no more Wobbling steering wheel !!
i just need to get that right rear un-buckled and then your polishing friend will need to be contacted
thanks again mate =D>
No problem mate I'll get the flexi joint ordered tomorrow then whenever you can get your flexi pipe taken off and I'll get it sorted.It normally takes a few days.
Watch out OZ here I come !!
Re: can you "mend" a flexipipe ?
Definitely worth knowing mate =D> , my Blitz flexi section has hit the road a couple of times when my car was too low. It's now at a sensible height but I could do with repairing the flexi section.
Have to be 'next month' though, if you know what I mean
Cheers
Matt
Have to be 'next month' though, if you know what I mean
Cheers
Matt
Re: can you "mend" a flexipipe ?
Sorry to move off topic but quackfit seem to be too dim to balance my wheels properly leaving me with buckets of wobble.
Where abouts did you get this super balance from?
Where abouts did you get this super balance from?
-
- Posts: 7069
- Joined: Thu Feb 03, 2005 5:23 pm
Re: can you "mend" a flexipipe ?
jonb- wrote:Sorry to move off topic but quackfit seem to be too dim to balance my wheels properly leaving me with buckets of wobble.
Where abouts did you get this super balance from?
most specialist tyre places should do it - it's called "precision balancing" - it;s where they use the stud holes to balance the wheel rather than the centre hole of the wheel.
Cost me £8 per wheel (cos i didn't purchase any tyres)
I personally got it done at Jet Wheel and tyre in Benfleet Essex.
hope that helps mate.
Car now Sold damn 5th Lumber Disc !
-
- IMOC Affiliated Trackday Organiser
- Posts: 10506
- Joined: Tue Jan 25, 2005 9:49 am
- Location: South Yorkshire
Re: can you "mend" a flexipipe ?
Why the precision balancing?? I've never had a problem with "ordinary balancing" and the wheel is located on the hub by the centre hole anyway - the wheel nuts just hold the wheel on..
Re: can you "mend" a flexipipe ?
My wheels came balanced with weights on the inside and outside of the rim. Quackfit and the like seem to only weight the centre of the rim which seems to not be enough on my clown wheels.
-
- Posts: 7069
- Joined: Thu Feb 03, 2005 5:23 pm
Re: can you "mend" a flexipipe ?
because the centre hole of the wheel was not 100% true in the middle of the wheel.
Mark Edwards mentioned this to me as he used to be a fitter in his younger years, and sometimes it's the only way to get a proper balance.
they use the same balancing machine but they use an adapter plate with 5 studs on and bolt the wheel on rather than just slotting the wheel on the machine using the centre hole.
Also cars like Citroen Saxo's HAVE to have this method done as they do not have a centre hole on their wheels !
Top Job too as I was going nuts
Sorted it out a treat
Mark Edwards mentioned this to me as he used to be a fitter in his younger years, and sometimes it's the only way to get a proper balance.
they use the same balancing machine but they use an adapter plate with 5 studs on and bolt the wheel on rather than just slotting the wheel on the machine using the centre hole.
Also cars like Citroen Saxo's HAVE to have this method done as they do not have a centre hole on their wheels !
Top Job too as I was going nuts
Sorted it out a treat
Car now Sold damn 5th Lumber Disc !
Re: can you "mend" a flexipipe ?
Frank,
Apparently Hayward & Scott do new flexipipes around 80 quid fitted.
BTW how did the date with the MGF lass go?
TART
Apparently Hayward & Scott do new flexipipes around 80 quid fitted.
BTW how did the date with the MGF lass go?
TART
-
- Posts: 7069
- Joined: Thu Feb 03, 2005 5:23 pm
Re: can you "mend" a flexipipe ?
ryan wrote:Frank,
Apparently Hayward & Scott do new flexipipes around 80 quid fitted.
BTW how did the date with the MGF lass go?
TART
hmmm I was told they were a fair bit more expensive than that - I will ring them to find out just to satisfy my curiosity
MGF lass ? - *cough*....
well she turned out to be a bit froward to say the least - she kept on ringing me, and basically hounding me... so I decided that meeting up with her again was not the best course of action
call me chicken but when someone is that keen then it's really not my thing.. (think I've been watching too many films "Bunny Bolier" anyone ? )
ryan wrote:
TART
I seem my reputation is building nicely on IMOC
Car now Sold damn 5th Lumber Disc !
-
- Posts: 7069
- Joined: Thu Feb 03, 2005 5:23 pm
Re: can you "mend" a flexipipe ?
ryan wrote:Frank,
Apparently Hayward & Scott do new flexipipes around 80 quid fitted.
BTW how did the date with the MGF lass go?
UPDATE*
don;t know where you got £80 from - I've been to see them in the interest of discovery .. over £200 mate
Car now Sold damn 5th Lumber Disc !
Blowing Flexipipe
Hi, I also have the same problem with my flexipipe.
I found the following site, with resonably priced items:
http://www.camskill.co.uk/brands/exhaus ... _lined.php
Am I being naive, or are these flexipipes suitable?
I found the following site, with resonably priced items:
http://www.camskill.co.uk/brands/exhaus ... _lined.php
Am I being naive, or are these flexipipes suitable?
-
- Posts: 1833
- Joined: Tue Jan 25, 2005 11:04 pm
- Location: Derbyshire
Re: can you "mend" a flexipipe ?
And for anyone in the midlands I had my flexi replaced for £80 by Custon Chrome in nuneaton.