Compatibility of Rev3 and Rev1 A/C connectors

Discussion and technical advice the SW20 MR2. 3S-GTE, 3S-GE, 3S-FE etc
Anything and everything to do with maintenance, modifications and electrical is in here for the Mk2.

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
yokomomr4bx
Posts: 216
Joined: Sun Jan 20, 2013 3:06 pm
Location: Cardiff

Compatibility of Rev3 and Rev1 A/C connectors

Post by yokomomr4bx »

Question for anyone in the know. I'm rebuilding the A/C system on my Rev3 and have sourced quite a few of the pipework specific to Rev3 (drier and pipework connecting to the pump). What I'm wondering is whether I can get away with Rev1 pipes that go from front to back, or is there a difference in the connectors used to join pipework together due to the R134a gas used in the Rev3 system?

Hope that makes sense, cheers.
yokomomr4bx
Posts: 216
Joined: Sun Jan 20, 2013 3:06 pm
Location: Cardiff

Re: Compatibility of Rev3 and Rev1 A/C connectors

Post by yokomomr4bx »

For anyone searching this thread in the future looking for an update... rev1/2 A/C connectors will NOT fit rev3 fittings - at least not at critical areas such as the connection to the compressor or condenser. The fittings are the same rough shape but the bore diameter is completely different. I have no doubt it could be made to work somehow, but it's truly not worth the effort. Find the correct parts.
Race Idiot
Posts: 2589
Joined: Wed Jan 25, 2006 10:48 pm
Location: Hertfordshire

Re: Compatibility of Rev3 and Rev1 A/C connectors

Post by Race Idiot »

Bit late but this is probably because rev1 and 2 mostly would be R12 systems and the rev3's are all r134a
Post Reply

Return to “MR2 MK2 1990 - 1999 NA & Turbo”