Hello knowledgeable folk,
just spotted that one of my reverse light bulbs is out and hoped someone could advise on how to replace.
I've not had a look in the boot yet, but are these accessed from inside the boot or do the rear light clusters need to come out and then the centre panel comes off to gain access?
ta
Michael
Rev3+ reverse light bulb change
Moderators: IMOC Moderators, IMOC Committee Members
Re: Rev3+ reverse light bulb change
From what I remember (although its been a while)...
I think you open the boot, then above the centre panel there should be two screws, you loosen these so the centre panel comes forward.
Once its out, you should be able just unscrew the bulb holder and switch the bulb.
Hope that helps
and just to be clear, the rear lights dont have to come off, the centre panel is independent.
I think you open the boot, then above the centre panel there should be two screws, you loosen these so the centre panel comes forward.
Once its out, you should be able just unscrew the bulb holder and switch the bulb.
Hope that helps
and just to be clear, the rear lights dont have to come off, the centre panel is independent.
Re: Rev3+ reverse light bulb change
easy-peasy then
Many thanks!
Many thanks!
Re: Rev3+ reverse light bulb change
Just to add the lower part of the panel has two retainers that are just a push fit into a metal tab, should come out easy enough.