Hi Guys,
I've just purchased a HKS fuel cut defender and im going to be wiring it into my rev 2 turbo. Current mods are; Blitz nur spec, de cat, apexi intake and CT20b turbo, currently boost peaks at 0.8 bar. Now on the fcd it has 12 settings (i dont have the instructions) which setting do I need to set it too? I dont want to be going past 1.1 bar as thats the max on rev 2 fueling.
Any help is much appreciated!
Cheers
[Mk2] [Turbo] HKS FCD
Moderators: IMOC Moderators, IMOC Committee Members
-
- Posts: 2238
- Joined: Wed Nov 28, 2007 7:08 pm
- Location: Birmingham
- Contact:
Re: [Mk2] [Turbo] HKS FCD
FCD is to stop fuel cut it has nothing to do with boost controlling. When i had mine im sure it was set on 4 though
Re: [Mk2] [Turbo] HKS FCD
Yes im fully aware that a FUEL CUT DEFENDER doesnt control the amount of boost pressure. It purely raises the fuel cut higher than the factory setting. I was explaining that im increasing the boost to just under 16psi and im wanting to set the fuel cut to 16psi and which setting on the fcd would i need to set it too.