in the next couple of Months im getting patrick to make and Fit and spray a TRD Kit to my rev 3 1995 mr2 tbar turbo .
Problem i have is i want to run cosmis 18inch alloys 9.5j et 10 x 11j et 8 alloys Not too Sure if will work also what tyre profile etc do i need ...
any help would be of Help and Also Help on new colour Choice i cant decide on White , black , Blue , or others currently Steel Mist grey but not to keen on the colour looks like an old man colour
[Mk2] [Turbo] TRD Replica bodykit and Wheel Size problems
Moderators: IMOC Moderators, IMOC Committee Members
-
- Posts: 85
- Joined: Tue Jun 30, 2015 6:46 pm
Re: [Mk2] [Turbo] TRD Replica bodykit and Wheel Size problems
You'll need to run spacers on the fronts as I have fitted 9J et10 in the past and the rim caught on my coilover lock rings Tyres were 245/45/17
I ran 11J et 12 on the rear with no problems, other than scrubbing a bit on the arch flare over bumps. Tyres were 255/40/17 iirc
I ran 11J et 12 on the rear with no problems, other than scrubbing a bit on the arch flare over bumps. Tyres were 255/40/17 iirc
Re: [Mk2] [Turbo] TRD Replica bodykit and Wheel Size problems
headrushuk wrote:Also Help on new colour Choice i cant decide on White , black , Blue , or others currently Steel Mist grey but not to keen on the colour looks like an old man colour
Blue is rather fetching
3VZ-FE V6 TRD Widebody Replica
Draven wrote "TRD dude. TRD... Can see awesomness from anywhere. "
http://www.imoc.co.uk/forums/viewtopic. ... sc&start=0
Draven wrote "TRD dude. TRD... Can see awesomness from anywhere. "
http://www.imoc.co.uk/forums/viewtopic. ... sc&start=0