[Mk2] [Turbo] Torque settings

chrishewett · Post by **chrishewett** » Mon Sep 07, 2015 5:17 pm

Could someone please give me the torque settings for the main bearing bolts and the big end bolts. Standard.
I am getting very different results when searching the web.
Chris

DB Mr2 · Post by **DB Mr2** » Mon Sep 07, 2015 6:45 pm

Pic from the bgb found on link below - if you scroll down further it goes into more detail.
Good link to have.

http://www.lovehorsepower.com/bgb/mecha ... anical.htm

jimGTS · Post by **jimGTS** » Mon Sep 07, 2015 6:49 pm

hopefully this is some help

gen3

http://bgbonline.celicatech.com/94_205_engine/EG/EG.htm

gen2

http://staff.osuosl.org/~bkero/bgb/mech ... anical.htm

chrishewett · Post by **chrishewett** » Mon Sep 07, 2015 9:46 pm

Thank you for the replies.
Higher torque for the con rods than the mains.
That was the query.

www.imoc.co.uk

[Mk2] [Turbo] Torque settings

[Mk2] [Turbo] Torque settings

Re: [Mk2] [Turbo] Torque settings

Re: [Mk2] [Turbo] Torque settings

Re: [Mk2] [Turbo] Torque settings