HELP!!!! Wiring on rev 2 with rev 3 engine

Anything to do with the electrics of the car.

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
TONYPONY1982
Posts: 8
Joined: Sat May 02, 2015 5:58 pm
Location: Bournemouth

HELP!!!! Wiring on rev 2 with rev 3 engine

Post by TONYPONY1982 »

Hi,

Today I have been following a rev 1 diagram on how to adjust the rev2 body loom to be compatible with a rev 3 engine loom. Followed it and still cant get the starter motor to fire. Anyone got any ideas or info that will help me along

Thank you in advance

Tony
Top
Peter Gidden
IMOC Affiliated Trackday Organiser
Posts: 10506
Joined: Tue Jan 25, 2005 9:49 am
Location: South Yorkshire

Re: HELP!!!! Wiring on rev 2 with rev 3 engine

Post by Peter Gidden »

Earth the starter relay.
Top
TONYPONY1982
Posts: 8
Joined: Sat May 02, 2015 5:58 pm
Location: Bournemouth

Re: HELP!!!! Wiring on rev 2 with rev 3 engine

Post by TONYPONY1982 »

Ok thanks Peter. I'll give that a try. I'll let you know how I get on. :)
Top
PW@Woodsport
Posts: 7642
Joined: Tue Dec 14, 2004 6:40 pm
Location: durham
Contact:
Contact PW@Woodsport

Re: HELP!!!! Wiring on rev 2 with rev 3 engine

Post by PW@Woodsport »

Make sure the main gearbox to chassis earth strap is attached and clean/tight, you will have a fusebox meltdown if you try and crank the engine without that.
Image
Top
TONYPONY1982
Posts: 8
Joined: Sat May 02, 2015 5:58 pm
Location: Bournemouth

Re: HELP!!!! Wiring on rev 2 with rev 3 engine

Post by TONYPONY1982 »

Got it a sorted. Was an earth wire. Thanks for your help chaps. Now running like a dream and back on the road yay
Top
Post Reply

Return to “Electrical”