[Mk2] [Turbo] Mk2 turbo ignition short

[Wathall]

Hi can any one tell me which wires ,relays and fuses are part of the ignition system .as in all of them and there where about think I have a brake in a wire or bad relay as not getting a spark now ,

I had the car running before but missing under load , waiting for new coil pack leads and plugs , the dizzy and rotary arm is good,but now it will not even fire so am pritty sure there is a brake somewhere or a relay has gone just don't know what to check

[mr2magic]

Check the 4 pin connector that goes to the dizzy housing first. If you look at the dizzy cap face on, the connector is at about 4 o'clock. Check it's sitting snug, the contacts are clean and the wiring is good!

[Wathall]

Cheers will do what's the best way th check the wiring ?

[Peter Gidden]

Wait until your new parts arrive and fit them. Then check for 12V at coil and ignitor. Then turn over and check for a spark.

No point in delving into electrics unless you have to.