Hi All,
![](./images/smilies/spacer.gif)
If anyone can shed any light on this it would be appreciated.
![](./images/smilies/spacer.gif)
My Power Steering has died, the Power Steering light is on and the steering is very heavy.
![](./images/smilies/spacer.gif)
My next step was to look at the manual, which suggests to check for diagnostics codes.
![](./images/smilies/spacer.gif)
So I bridged Terminals E1
![](./images/smilies/spacer.gif)
& Tc.
![](./images/smilies/spacer.gif)
However, the light simply blinks around twice a second which the manual suggests will occur if no error codes have been stored.
![](./images/smilies/spacer.gif)
I am aware of the relay sticking being a common problem
![](./images/smilies/spacer.gif)
- however I suspect if this was the case an error would occur? I was going to nut both terminals on top of each other to bypass the relay as a test
![](./images/smilies/spacer.gif)
(as suggested here:
http://www.mr2oc.co.uk/know-your-2-know ... bartid=112)
![](./images/smilies/spacer.gif)
- would this be worth trying anyway?
![](./images/smilies/spacer.gif)
Any help is always always much appreciated.
![](./images/smilies/spacer.gif)
Regards