Front and rear ARB bush size?

Discussion and technical advice the SW20 MR2. 3S-GTE, 3S-GE, 3S-FE etc
Anything and everything to do with maintenance, modifications and electrical is in here for the Mk2.

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
Shaleskin
Posts: 43
Joined: Wed Apr 30, 2014 11:27 pm
Location: West Sussex

Front and rear ARB bush size?

Post by Shaleskin »

Basically as the title says, but for a Rev 2 Turbo.
Really need to get them done now. :roll:
mrturbotom
Posts: 257
Joined: Mon Jun 29, 2009 11:59 pm
Location: Chorley, Lancashire

Re: Front and rear ARB bush size?

Post by mrturbotom »

18mm front 19mm rear,

Rear is 100% 19mm but I've never replaced the fronts
fingers99
Posts: 204
Joined: Tue May 13, 2014 11:31 pm
Location: Liverpool

Re: Front and rear ARB bush size?

Post by fingers99 »

Pretty sure they're all the same -- if standard ARBs. And the design is different front to rear anyway. Powerflex or Toyota.

So, if standard, just order them. If they're not standard, you'll need to measure them anyway.
Shaleskin
Posts: 43
Joined: Wed Apr 30, 2014 11:27 pm
Location: West Sussex

Re: Front and rear ARB bush size?

Post by Shaleskin »

Yeah all standard so 18mm it is :)
Post Reply

Return to “MR2 MK2 1990 - 1999 NA & Turbo”