[Mk2] [NA] Headlights Closing Down Mod ?

Posts about anything do to with modifying your car such as fitting aftermarket parts, bodykit, or tuning the engine for more performance.

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
MR22
Posts: 500
Joined: Sat Aug 26, 2006 10:22 pm

[Mk2] [NA] Headlights Closing Down Mod ?

Post by MR22 »

I believe there is a simple mod that can be made so that the headlight units will close down if the sidelights are on and the headlights are then flashed to warn other road users.
As they are at this moment they stay up and can only be returned to the flush position by switching the sidelights off.
As detailed elsewhere, I have tried cutting the red cable connected to the retract relay but this does not work on my UK Rev2. Maybe that mod was for a Mk1? :(
Any advice would be gratefully received :D
robbie_742003
Posts: 1167
Joined: Wed Dec 15, 2004 7:50 pm
Location: Midlands

Re: [Mk2] [NA] Headlights Closing Down Mod ?

Post by robbie_742003 »

If you have a look on MR2OC there is a how to in the 'know your 2' I think. :thumleft:
platmatt8
Posts: 2114
Joined: Sun Sep 10, 2006 8:41 pm
Location: Blackburn (Home of the mighty Rovers)

Re: [Mk2] [NA] Headlights Closing Down Mod ?

Post by platmatt8 »

Red wire with 2 sliver stripes cut it :thumleft:
Torero
Posts: 1578
Joined: Sat Nov 29, 2008 11:33 pm
Location: Westminster, London
Contact:

Re: [Mk2] [NA] Headlights Closing Down Mod ?

Post by Torero »

platmatt8 wrote:Red wire with 2 sliver stripes cut it :thumleft:
+1 :thumleft:

I didn't just cut it I put a small in line fuse holder in place and when I need to raise the lights for maintenance I just put in a fuse.

Simples!!!
3VZ-FE V6 TRD Widebody Replica

Draven wrote "TRD dude. TRD... Can see awesomness from anywhere. "

http://www.imoc.co.uk/forums/viewtopic. ... sc&start=0
MR22
Posts: 500
Joined: Sat Aug 26, 2006 10:22 pm

Re: [Mk2] [NA] Headlights Closing Down Mod ?

Post by MR22 »

Thanks for the info. :clap:
Done and working and have fitted a small tumble switch with 3M double sided tape so the head lamps can be made to stay up for cleaning or bulb changing. :D
Post Reply

Return to “Modifications”