![](./images/smilies/spacer.gif)
Have another issue I have never been able to sort in my 10 year MR2 Turbo ownership.
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
Drivers side front suspension seems to knock when going over minor dips, drain covers, holes etc, but nothing noticeable when going over speed humps.
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
Car is REV 3 1994 Turbo
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
I have personally changed:
![](./images/smilies/spacer.gif)
Track Control Arm
![](./images/smilies/spacer.gif)
Tie Bar
![](./images/smilies/spacer.gif)
Antiroll bar bushes
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
Swapped drop link from passenger side to drivers and vice versa, no change to noise.
![](./images/smilies/spacer.gif)
2 x new top mounts
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
2 x used good Bilstien front shocks that looked pretty new
![](./images/smilies/spacer.gif)
Bottom ball joints pair
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
All of this has made not an iota of difference and I still get the same sound.
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
Even resorted to removing everything loose inside frunk and wheel arch liner drivers side to see if maybe something flapping but no.
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
I am now totally lost and have no idea, the worst thing is I have never tracked it down in the 10 years I have owned the car and it always passes MOTs even thou I have said to the MOT guy its got a knocking pleas find it as I want to know.
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
The funny thing is when the car has been used for a good 15
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![Brick wall ](*,)](./images/smilies/eusa_wall.gif)
![](./images/smilies/spacer.gif)
![Brick wall ](*,)](./images/smilies/eusa_wall.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
Can't feel it though steering or breaking, can't feel it anywhere but can hear it and its quite loud.
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
Anyone have any idea
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
Already pulled my hair out and swore lots after spending out on the new bits, fortunately sold the used parts on well known auction site for reasonable amount and buyers reported the bits fixed their issues
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
Great full for any help on this one as it would close this chapter of the annoying noise.
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
Thanks