1992 MR2 MK2 2.0 G-LIMITED

Create a post with details about your car.

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
ishaaq
Posts: 4
Joined: Sat Jan 25, 2014 4:08 pm
Location: Leeds - Batley

1992 MR2 MK2 2.0 G-LIMITED

Post by ishaaq »

Hi guys and girls,

after a hunt for a nice cheap little sports car. i found myself coming across this. after looking at it decided to buy it. this weekend i took it for an MOT (knowing it was going to fail).

A few things wrong:

1. Front nearside anti roll bar linkage
2. Nearside front tyre has a bulge
3.Exhaust emissions lambda reading
4.Offside rear parking brake recording little or no effort
5. Parking brake efficiency below requirements.

and it also has the common rocker cover gasket leak. behind drivers seat in engine bay?

It is my first post. But wanted some advice on getting the right parts for the vehicle.
Peter Gidden
IMOC Affiliated Trackday Organiser
Posts: 10506
Joined: Tue Jan 25, 2005 9:49 am
Location: South Yorkshire

Re: 1992 MR2 MK2 2.0 G-LIMITED

Post by Peter Gidden »

Welcome to IMOC.

Your faults are all usual faults linked purely to age or periods of non-use.

1. Droplink - cheap and easy to replace
2. Replace tyre
3. What were your emission test figures?
4 & 5. Will be a seized handbrake cable and/or caliper.

If you need any help with replacing my workshop is a few miles from Barnsley.
matt-mr2
Posts: 1259
Joined: Sat Apr 24, 2010 6:33 pm
Location: barnsley

Re: 1992 MR2 MK2 2.0 G-LIMITED

Post by matt-mr2 »

Welcome to iMOC
ishaaq
Posts: 4
Joined: Sat Jan 25, 2014 4:08 pm
Location: Leeds - Batley

Re: 1992 MR2 MK2 2.0 G-LIMITED

Post by ishaaq »

Right guys I have seriously looked all over the engine bay. I can not for the life of me find my lambda sensor. Seen threads That say its under a heat sheild which I cant remove for the life of me. Some say it just next to dip stick. I cant post a picture of my engime bay as I havent got enough post.

PLEASE PLEASE HELP GUYS :)
aussieGT
Posts: 1249
Joined: Fri Mar 12, 2010 4:17 am
Location: Staffs/Stoke

Re: 1992 MR2 MK2 2.0 G-LIMITED

Post by aussieGT »

Image

what about Omega Mu?
JD
Posts: 2888
Joined: Mon Apr 16, 2012 6:23 pm
Location: The Far East

Re: 1992 MR2 MK2 2.0 G-LIMITED

Post by JD »

ishaaq wrote:Right guys I have seriously looked all over the engine bay. I can not for the life of me find my lambda sensor. Seen threads That say its under a heat sheild which I cant remove for the life of me. Some say it just next to dip stick. I cant post a picture of my engime bay as I havent got enough post.

PLEASE PLEASE HELP GUYS :)


I remember that the O2 sensor on a Rev 2 NA is a PITA to swap, you have to get in underneath and feel for it. I don't remember how far down the pipe it is, though.
JD
Posts: 2888
Joined: Mon Apr 16, 2012 6:23 pm
Location: The Far East

Re: 1992 MR2 MK2 2.0 G-LIMITED

Post by JD »

Just found this...

Image
Post Reply

Return to “Member Profiles”