cutting out problems

Discussion and technical advice the SW20 MR2. 3S-GTE, 3S-GE, 3S-FE etc
Anything and everything to do with maintenance, modifications and electrical is in here for the Mk2.

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
kevin millar 1977
Posts: 77
Joined: Tue Jul 16, 2013 9:27 pm

cutting out problems

Post by kevin millar 1977 »

Having issues with my 1992 n/a rev2 import at the moment the old car is sometimes having bother starting when it's raining or cold. But then dos start to sometimes in these conditions but then when driving it will then sometimes just decide to cut out altogether. Any 1 got any ideas on the problem I AM having cheers kevin
KarlBristol
Posts: 2962
Joined: Fri Aug 02, 2013 2:08 am
Location: Bristol

Re: cutting out problems

Post by KarlBristol »

I'd start at the basics - check the spark plugs, HT leads etc...

My initial thoughts are that it's either a poor spark or there's water ingress into the ignition system when it rains heavily :-k

Have you changed any parts of the ignition system?
Played around in the engine bay at all before these faults happened?


I would also check that your earths are all in good order whilst your having a play around in the engine bay as having decent earth connections can only help :thumleft:
Selling up my highly modified and restored Rev 1 V6 3.0 1MZ-FE VVTi

http://www.imoc.co.uk/forums/viewtopic.php?t=176156
Peter Gidden
IMOC Affiliated Trackday Organiser
Posts: 10506
Joined: Tue Jan 25, 2005 9:49 am
Location: South Yorkshire

Re: cutting out problems

Post by Peter Gidden »

99% distributor cap or coil related.

When was the cap and arm last replaced? Is the seal between cap and distributor present?

Check the coil for cracks in the plastic body.
kevin millar 1977
Posts: 77
Joined: Tue Jul 16, 2013 9:27 pm

car problems

Post by kevin millar 1977 »

cheers guys I haven't changed any parts in the bay at all in anyway so think its needing to go get a good look at to see what the issue is. everything all seems to be in place properly too any ideas of anywhere in and around edinburgh area that is well known with mr2s???? cheers kevin
woz_106
Posts: 121
Joined: Sun May 02, 2010 2:59 pm
Location: birmingham

Re: cutting out problems

Post by woz_106 »

As peter says my bet would be coil, I had the same issues with my rev 3. Won't hurt replacing the cap and arm aswell though.
Post Reply

Return to “MR2 MK2 1990 - 1999 NA & Turbo”