i got told about a rolling road - dyno and remapping centre in warrington cheshire so yesterday i took dog for a walk and after a bit of searching found it
it's called
TDI NORTH - power tuning
21 - 24 Aston Court
Kingsland Grange
Woolston
Warrington
Cheshire
Wa1 4SG
01925 289100
www.tdi-north.com
the guy that runs the place is called Neil Holden
the dyno costs £55 per run with printout
remapping can be done if you let neil know what ecu you're running cos it's mainly a honda tuners but he's done both of my previous MKII's with no problems
found it :)
Moderators: IMOC Moderators, IMOC Committee Members
Re: found it :)
He's a big name around Manchester for the Honda tuners. Never heard anything bad. I've been to a rolling road open day there before.
-
- Posts: 7172
- Joined: Thu Dec 16, 2004 6:39 pm
- Location: Oldham
Re: found it :)
You've heard about it & happened to find it on a dog walk, but have used them twice before??!!
Either way, good place TDi, have a good rep & as said, well used by the Hinda fraternity!
Either way, good place TDi, have a good rep & as said, well used by the Hinda fraternity!
476bhp & 415ft lb @ 1.9bar Magic by Ryan!
Gone, but never forgotten
Now with a mk1.5 & a NHB EP3
Gone, but never forgotten
Now with a mk1.5 & a NHB EP3
Re: found it :)
Never used north as it is to far but Tdi south will do a charity dyno day and all the money goes to the charity not Tdi been to a few they have held. Tdi south has the hub dyno and is More accurate so may be a imoc charity dyno day?? Just an idear ?!!
Re: found it :)
what happened was their old shop used to be in winwick in warrington and then they moved to the new place in woolston.
i started the search for them again by going back to where i thought they were and no one knew anything about them. so i started asking round and after quite a few long walks with my dog a guy in a commercial workshop gave me their addy so i went and saw
had really good experience using their services last time which is why i wanted to find them again. from memory there isn't too much that neil can't do
he also said that if he can't get hold of the right software for her then he's got a greddy ecu that he'll drop in her
was also putting the addy up for other members that might want to dyno their 2's
i started the search for them again by going back to where i thought they were and no one knew anything about them. so i started asking round and after quite a few long walks with my dog a guy in a commercial workshop gave me their addy so i went and saw
had really good experience using their services last time which is why i wanted to find them again. from memory there isn't too much that neil can't do
he also said that if he can't get hold of the right software for her then he's got a greddy ecu that he'll drop in her
was also putting the addy up for other members that might want to dyno their 2's