How well does this fitment go ? I dont want to mess up the handling of the car.. will it fit ok ? or will I need spacers?
Thank you
17" 7.5 J ET 50 alloys and fitment onto an mk2 rev3 ?
Moderators: IMOC Moderators, IMOC Committee Members
Re: 17" 7.5 J ET 50 alloys and fitment onto an mk2 rev3 ?
Are they Lexus wheels by any chance? We went down that road and it didn't work. Could have done it with longer studs and spacers but we opted for proper staggered wheels instead.
Re: 17" 7.5 J ET 50 alloys and fitment onto an mk2 rev3 ?
they're veilside , currently on a celica , they have the same tyre sizes on each alloy too which im not sure is suitable for an mr2 correct?
Re: 17" 7.5 J ET 50 alloys and fitment onto an mk2 rev3 ?
they are Veilside Andrew Racing alloys
Re: 17" 7.5 J ET 50 alloys and fitment onto an mk2 rev3 ?
Libertine wrote:they're veilside , currently on a celica , they have the same tyre sizes on each alloy too which im not sure is suitable for an mr2 correct?
I'm sure a celica is 5x100 stud pattern, so wheels wouldn't fit unless you get some adapters
Re: 17" 7.5 J ET 50 alloys and fitment onto an mk2 rev3 ?
they are 5x100 , what is an mr2 size? 5x114.3 right ?
would i need 4 of these ?
http://www.ebay.co.uk/itm/JDM-R-Pair-of ... 4abfb68356
would i need 4 of these ?
http://www.ebay.co.uk/itm/JDM-R-Pair-of ... 4abfb68356
Re: 17" 7.5 J ET 50 alloys and fitment onto an mk2 rev3 ?
At ET50 I recall being told that it's something like 15mm up front and 20-25mm on the rear. But yes, you will need adaptors to run wheels with a different PCD.
Re: 17" 7.5 J ET 50 alloys and fitment onto an mk2 rev3 ?
Libertine wrote:they are 5x100 , what is an mr2 size? 5x114.3 right ?
would i need 4 of these ?
http://www.ebay.co.uk/itm/JDM-R-Pair-of ... 4abfb68356
You will need something like this:
http://www.ebay.co.uk/itm/H-R-PCD-Adapt ... 257a43d466
Re: 17" 7.5 J ET 50 alloys and fitment onto an mk2 rev3 ?
wow.. that is expensive! i'd be looking at £250 just for adapters!
Re: 17" 7.5 J ET 50 alloys and fitment onto an mk2 rev3 ?
walk away...that is Honda offset. waste of time getting them on a '2