\\\\\ How do you remove fog lights on mr2 mk2 :S //////
Moderators: IMOC Moderators, IMOC Committee Members
\\\\\ How do you remove fog lights on mr2 mk2 :S //////
\\\\\ How do you remove fog lights on mr2 mk2 :S //////
Re: \\\\\ How do you remove fog lights on mr2 mk2 :S //////
With a drill
There's two philips head screws per light.
Good luck
There's two philips head screws per light.
Good luck
Re: \\\\\ How do you remove fog lights on mr2 mk2 :S //////
my good god thats excatly what i thought the problem was and how to remove them but was hoping thee was a easier way
-
- Posts: 6213
- Joined: Tue Dec 14, 2004 7:14 pm
- Location: glasgow
- Contact:
Re: \\\\\ How do you remove fog lights on mr2 mk2 :S //////
take the front bumper off first, it does come off with a bit of wiggling, and that'll make it easier to get in with the drill bit
edit: I assume you are talking about the front fogs as the back ones are much easier!
edit: I assume you are talking about the front fogs as the back ones are much easier!
Re: \\\\\ How do you remove fog lights on mr2 mk2 :S //////
i broke loads of mr2's and i think ive managed to remove 1x single screw without drilling them out
Re: \\\\\ How do you remove fog lights on mr2 mk2 :S //////
Here's the guide I followed:
http://stephenmason.com/cars/mr2foglight.html
Need to be very careful with drilling though and has to be central on the screws to work.
http://stephenmason.com/cars/mr2foglight.html
Need to be very careful with drilling though and has to be central on the screws to work.
-
- Posts: 6213
- Joined: Tue Dec 14, 2004 7:14 pm
- Location: glasgow
- Contact:
Re: \\\\\ How do you remove fog lights on mr2 mk2 :S //////
stuMR2eye wrote:Here's the guide I followed:
http://stephenmason.com/cars/mr2foglight.html
Need to be very careful with drilling though and has to be central on the screws to work.
great guide but remove the bumper with some effort and get into the fog light screws much easier and with more control
Re: \\\\\ How do you remove fog lights on mr2 mk2 :S //////
JohnnyC wrote:With a drill
There's two philips head screws per light.
Good luck
^What he said!
fog light s**te screws
Best to invest in some stainless steel hexagonal headed screws 5mm by 20/25mm long as replacements, just enough room for 8mm socket on extension x 1/4 drive.
Can you source an extended drill perhaps? or braise your drill in a 12"x 6mm long rod to drill the old head off, rather than removing the bumper.
Good luck.
Can you source an extended drill perhaps? or braise your drill in a 12"x 6mm long rod to drill the old head off, rather than removing the bumper.
Good luck.
fog light s**te screws
Best to invest in some stainless steel hexagonal headed screws 5mm by 20/25mm long as replacements, just enough room for 8mm socket on extension x 1/4 drive.
Can you source an extended drill perhaps? or braise your drill in a 12"x 6mm long rod to drill the old head off, rather than removing the bumper.
Good luck.
Can you source an extended drill perhaps? or braise your drill in a 12"x 6mm long rod to drill the old head off, rather than removing the bumper.
Good luck.
-
- IMOC Affiliated Trackday Organiser
- Posts: 10506
- Joined: Tue Jan 25, 2005 9:49 am
- Location: South Yorkshire
Re: \\\\\ How do you remove fog lights on mr2 mk2 :S //////
I use 6" long drill bits. Easy to buy from engineers' suppliers.
Re: \\\\\ How do you remove fog lights on mr2 mk2 :S //////
raptor95GTS wrote:take the front bumper off first, it does come off with a bit of wiggling, and that'll make it easier to get in with the drill bit
edit: I assume you are talking about the front fogs as the back ones are much easier!
There are 2 plastic push-fit lugs which attach the bumper to the crash bar above/behind each fog light, so don't try this unless they are already missing or you want to mangle your bumper.
I got a long 6mm drillbit fron ebay and retapped mine for M6 allen head bolts. Use lots of drilling lube and watch for heat buildup - you can end up melting the plastic tabs on the fogs.
Re: \\\\\ How do you remove fog lights on mr2 mk2 :S //////
Your threads will probably be destroyed when drilling out too.
I found rivnuts are great for recreating captive threads in previously knackered steel.
I found rivnuts are great for recreating captive threads in previously knackered steel.
-
- Posts: 6213
- Joined: Tue Dec 14, 2004 7:14 pm
- Location: glasgow
- Contact:
Re: \\\\\ How do you remove fog lights on mr2 mk2 :S //////
asdrewq wrote:raptor95GTS wrote:take the front bumper off first, it does come off with a bit of wiggling, and that'll make it easier to get in with the drill bit
edit: I assume you are talking about the front fogs as the back ones are much easier!
There are 2 plastic push-fit lugs which attach the bumper to the crash bar above/behind each fog light, so don't try this unless they are already missing or you want to mangle your bumper.
I got a long 6mm drillbit fron ebay and retapped mine for M6 allen head bolts. Use lots of drilling lube and watch for heat buildup - you can end up melting the plastic tabs on the fogs.
a mate that did his own fog lights then mine managed it so there must be a way
-
- IMOC Affiliated Trackday Organiser
- Posts: 10506
- Joined: Tue Jan 25, 2005 9:49 am
- Location: South Yorkshire
Re: \\\\\ How do you remove fog lights on mr2 mk2 :S //////
asdrewq wrote:I got a long 6mm drillbit fron ebay and retapped mine for M6 allen head bolts.
Sure that wasn't 5mm drill bit?
A 6mm hole will be too big for an M6 tap.
FOG LIGHTS
I had a similar problem some years ago and eventually drilled round the outside of the fixing screws.
Ultimatley this made the fixing hole a little larger but I was able to get them off okay to replace a bulb.
They fitted back on fine with a washer under the screw and have been there the last 8 years!
If I had to do it again I think I would use a thin brass tube with a serated edge (like a hole saw). This would then cut through the plastic and the lights can be removed and refitted as above with a larger washer.
As everyone has commented the problem is getting at the screws.
To be fair I haven't tried that methiod but see no reason why it won't work and be neater than the ring of small holes I drilled.
Good luck
Geoff
Ultimatley this made the fixing hole a little larger but I was able to get them off okay to replace a bulb.
They fitted back on fine with a washer under the screw and have been there the last 8 years!
If I had to do it again I think I would use a thin brass tube with a serated edge (like a hole saw). This would then cut through the plastic and the lights can be removed and refitted as above with a larger washer.
As everyone has commented the problem is getting at the screws.
To be fair I haven't tried that methiod but see no reason why it won't work and be neater than the ring of small holes I drilled.
Good luck
Geoff