hubs

Discussion and technical advice the SW20 MR2. 3S-GTE, 3S-GE, 3S-FE etc
Anything and everything to do with maintenance, modifications and electrical is in here for the Mk2.

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
4ndee
Posts: 2293
Joined: Tue Aug 24, 2010 7:06 pm
Location: cornwall

hubs

Post by 4ndee »

Are n.a and turbo abs rear hubs different?
gavinda
Posts: 408
Joined: Wed Oct 22, 2008 12:20 am
Location: leeds

Re: hubs

Post by gavinda »

spline is different on the NA hub bearing/ shaft so you can not just swap used na hubs onto turbo shafts/car
Last edited by gavinda on Sat Feb 23, 2013 1:08 pm, edited 2 times in total.
4ndee
Posts: 2293
Joined: Tue Aug 24, 2010 7:06 pm
Location: cornwall

Re: hubs

Post by 4ndee »

???
gavinda
Posts: 408
Joined: Wed Oct 22, 2008 12:20 am
Location: leeds

Re: hubs

Post by gavinda »

yea sorry wot i said before was correct.

the abs knuckle/ (carrier sub assembly) is the same but in order to use one from the N/A you would need to press out the bearing and replace it with a NEW one for the turbo with the larger hole
Post Reply

Return to “MR2 MK2 1990 - 1999 NA & Turbo”