Hi
Having a little problem - car starts fine but cannot seem to hold an idle / stalls - runs a little rough when revved.....help appreciated.
Cheers
Paul
Rev 2 Turbo - starting then dies
Moderators: IMOC Moderators, IMOC Committee Members
Re: Rev 2 Turbo - starting then dies
Hi there,
Could be many things, mine did this a few months back and it was the AFM that stopped working.
Have you had any work done on the car in the engine where a vacuum hose could have been left off?
I'd check that you dont have a vacuum leak somewhere rev 1/2s run rough if there is a leak.
Adam
Could be many things, mine did this a few months back and it was the AFM that stopped working.
Have you had any work done on the car in the engine where a vacuum hose could have been left off?
I'd check that you dont have a vacuum leak somewhere rev 1/2s run rough if there is a leak.
Adam
-
- IMOC Moderator
- Posts: 10902
- Joined: Sat Dec 10, 2005 1:32 pm
- Location: Bonnie Dundee
- Contact:
Re: Rev 2 Turbo - starting then dies
Check the afm plug is in properly
-
- IMOC Affiliated Trackday Organiser
- Posts: 10506
- Joined: Tue Jan 25, 2005 9:49 am
- Location: South Yorkshire
Re: Rev 2 Turbo - starting then dies
Error codes?