![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
I know someone must of documented this swap but I can't find it.
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
Cheers folks
![](./images/smilies/spacer.gif)
![thumleft :thumleft:](./images/smilies/icon_thumleft.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
P.s.
![](./images/smilies/spacer.gif)
Moderators: IMOC Moderators, IMOC Committee Members
kaiowas wrote:You don't'need' an SC engine cover but you'll be able to get better airflow through the IC if you fit one.
MartG wrote:kaiowas wrote:You don't'need' an SC engine cover but you'll be able to get better airflow through the IC if you fit one.
I went with the option of fitting a chargecooler, so kept the NA lid
Elliott_Knight wrote:I wouldn't know where to start with the swap that's why I wanted some documented info to help but what would be better is if anyone lives near the Diss area(Norfolk/Suffolk) and could give me a hand.
![]()
I've got a indoor garage with room to work, axle stands and a trolly jack and most needed tools and would of course be happy to pay for your help and stick the kettle on!
Or if someone knows a good garage in the area that could do it, but I would prefer to do it myself with some help so that I can learn a little.
Regards and thanks again for your time
Elliott_Knight wrote:P.s.I gather I will also need a SC engine lid?
Elliott_Knight wrote:
Kalowas would you be able to give me a physical hand with this swap? I can come to you if that's easier and I would be more than happy to pay for your work and expertise
I really do appreciate your time folks![]()
![]()