[Mk2] [Turbo] Nur Spec R alternative - advice pls

[Rixx]

Thanks for this Nic.

What are your thoughts on the Berk dual exhaust. In earnest, I've always preferred a single exit.. but the HKS one (which has caught my eye) is a lot more expensive than the berk..

[Nic]

Sorry I don't have any experience of the Berk exhaust, there are videos on Youtube though.

This link may also help http://www.madpsi.net/MR2Exhaust.htm

[Tsia]

Just weighed the Hi-Power, 15.5KG!

[Magic Beans]

Just weighed the Hi-Power, 15.5KG!

I was way off then

[Tsia]

Just weighed the Hi-Power, 15.5KG!

I was way off then

To be fair, so was I. I walked into the lounge, picked it up and was like "Eh... yeah he's probably right."

[ej2_sir]

+1 for Fujitsubo RM01A.... Got one too. Very quiet on idle and low revs. Full stainless 3" and very lightweight

[steve]

Fujitsubo Legalis-R

Even with the centre section made from 3" stainless, mine is still very quiet (from in the car i only hear the turbo spooling) compared to my old Departure 2 Pro and KO Racing T1.

[Baker]

Hks silents are 2.25 inch iirc, certainly not 3" which you need. Go for the fujisubo.

[ashley]

Hks silents are 2.25 inch iirc, certainly not 3" which you need. Go for the fujisubo.

2.5 inch

[mr2turbo99]

could fit one of these.

http://www.nengun.com/apexi/exhaust-control-valve

[Harold]

Thanks for this Nic.

What are your thoughts on the Berk dual exhaust. In earnest, I've always preferred a single exit.. but the HKS one (which has caught my eye) is a lot more expensive than the berk..

I have a Berk and it sounds bloody lovely, not too loud at low speeds, but put your foot down and it has a lovely rumble/roar.

[StevieL]

Legailis R? I'm sure Locky was running 450hp with one?

[Nic]

Hks silents are 2.25 inch iirc, certainly not 3" which you need. Go for the fujisubo.

According to the HKS specs the piping is 75mm/2.95"

[Baker]

Hks silents are 2.25 inch iirc, certainly not 3" which you need. Go for the fujisubo.

According to the HKS specs the piping is 75mm/2.95"

Trying to remember when i had one...the exhaust tapers to a larger diameter as it goes through to the exit pipe, the first section near to the cat is something silly like 2.25/2.5".

i do remember well changing to the blitz nur, noticeable difference in power, pipe size.

[ashley]

I've just got the back section of the HKS Silent High Power and the front flange on it is 2.5 inch