[Mk2] [NA] Wheel nuts - it ought to be easy.

[Alasdair Mair]

In need of new wheel nuts to fit my new wheels as the standard MR2 nuts are too large in diameter and the new wheels required redius seat nuts. I assumed this would take 5 minutes on ebay to find... as it turns out not many people like to make M12x1.5 nuts with a radius seat. Anyone had similar experience? OR even better, anyone know where i can find a set? Thanks in advance

[synXero]

You're sure you don't just need conical nuts? Very common and I'd say 99% of them will fit 99% of aftermarket alloys.

[Alasdair Mair]

I considered that but i cant be sure because the mating face of the wheel matches the profile of a radius seat nut. WedsSport SA-90's if that helps anyone advise me.

[gazrev1tubby]

If it's just a set of standard aftermarket wheel nuts you need, I have a set of brand new ones here

[synXero]

There's a set of SA-90s on driftworks. Ask the seller.

[T.F.S.]

You can get ones like this on ebay but the ones I needed for mine required the flare of the nut to be a bit higher than midway up so i needed to have some milled down to suit, are yours like that?

[BLZ-8027]

In need of new wheel nuts to fit my new wheels as the standard MR2 nuts are too large in diameter and the new wheels required redius seat nuts. I assumed this would take 5 minutes on ebay to find... as it turns out not many people like to make M12x1.5 nuts with a radius seat. Anyone had similar experience? OR even better, anyone know where i can find a set? Thanks in advance

Like these ?

http://www.ebay.co.uk/sch/i.html?_nkw=m ... wheel+nuts

[mrfil13]

i got these from driftworks with the hex key - M12 x 1.5

http://www.driftworks.com/shop/high-str ... kages.html

[alanmr2turbo]

http://www.rhdjapan.com/rays-c-c-ultra-wheel-nut-61229

Like these ones?

I have only seen them in the USA or Japan though. The cheapest full set i found was £70 + Delivery + Government robbing taxes