Just wondering if anyone has the measurements of the studs on the turbo for the downpipe?
Thanks
Ant
[Mk2] [Turbo] Turbo stud size
Moderators: IMOC Moderators, IMOC Committee Members
-
- Posts: 9202
- Joined: Tue Dec 14, 2004 12:15 pm
- Location: Crawley, West Sussex
- Contact:
-
- IMOC Affiliated Company
- Posts: 4928
- Joined: Tue Dec 14, 2004 9:33 am
- Location: 01442 601301
- Contact:
-
- Posts: 9202
- Joined: Tue Dec 14, 2004 12:15 pm
- Location: Crawley, West Sussex
- Contact:
Re: [Mk2] [Turbo] Turbo stud size
Cheers Luke, it's the length I'm after specifically.
Re: [Mk2] [Turbo] Turbo stud size
total length...48mm, with the longer (20mm) section of thread sticking out...the nut shouldn't be on it, this is one i use for another purpose but it came from that ct26 in the pic.
-
- Posts: 9202
- Joined: Tue Dec 14, 2004 12:15 pm
- Location: Crawley, West Sussex
- Contact:
Re: [Mk2] [Turbo] Turbo stud size
Perfect. Thanks for confirming. I'm assuming the ct20b would have the same studs - if someone could confirm.
Re: [Mk2] [Turbo] Turbo stud size
I took 2 out of this ct26 to put into my ct20...which is now on the car and fine.
-
- Posts: 9202
- Joined: Tue Dec 14, 2004 12:15 pm
- Location: Crawley, West Sussex
- Contact:
Re: [Mk2] [Turbo] Turbo stud size
Cool. I actually need about 47mm so even I'd I have to trim these they should be fine.
Thanks for the info!
Thanks for the info!