Hey all, I'm in the process of decking the car on its teins, but I'm goin to need some spacers for the rears.
Can anyone confirms, the centre bores needed for the rear of the mark2's are 60.1mm??
Also does anyone no if there are any hubcentric spacers from other makes or cars that will fit the mr2's, as with my misses's glanza demon tweaks had toyota glanza hubcentric spacers priced as £125 but we found out the toyota aygo hubcentric spacers were the same fitment an nearly half the price!
I have thrown up a wanted thread in the wanted section if anyone has any for sale? Either 20mm 25's or 30mm are fine
Cheers guys Gav
Hubcentric spacers, what centre bore? 60.1mm??
Moderators: IMOC Moderators, IMOC Committee Members
Hubcentric spacers, what centre bore? 60.1mm??
Last edited by GTS GAV on Tue Jan 25, 2011 12:45 pm, edited 1 time in total.
stock isnt that soup or something.....?
tic tac 500bhp build thread
http://www.imoc.co.uk/forums/viewtopic. ... 57#1182357
tic tac 500bhp build thread
http://www.imoc.co.uk/forums/viewtopic. ... 57#1182357
Re: Hubcentric spacers, what centre bore? 60.1mm??
i cant remember the center bore size sorry but i do know that nissan spacers will fit (although i believe the center bore is slighlty larger so may need spiggot rings). but these are easier to find than toyota spacers becuase they are used alot on drift cars.
Re: Hubcentric spacers, what centre bore? 60.1mm??
Thanks jack yeah I thort that mite be the case lol
Jeff d confirmed the bore size is 60.1mm on my wanted thread can anyone concur that this is correct?
Jeff d confirmed the bore size is 60.1mm on my wanted thread can anyone concur that this is correct?
stock isnt that soup or something.....?
tic tac 500bhp build thread
http://www.imoc.co.uk/forums/viewtopic. ... 57#1182357
tic tac 500bhp build thread
http://www.imoc.co.uk/forums/viewtopic. ... 57#1182357
Re: Hubcentric spacers, what centre bore? 60.1mm??
put it in google for you and found this
http://thealloywheelguide.co.uk/fitment-data/toyota/
it would seem he is correct
http://thealloywheelguide.co.uk/fitment-data/toyota/
it would seem he is correct
-
- Posts: 976
- Joined: Sun Jul 19, 2009 5:47 pm
- Location: Eastwood, Essex
Re: Hubcentric spacers, what centre bore? 60.1mm??
Yes matey, 60.1mm is correct
Re: Hubcentric spacers, what centre bore? 60.1mm??
Cheers for the help lads
stock isnt that soup or something.....?
tic tac 500bhp build thread
http://www.imoc.co.uk/forums/viewtopic. ... 57#1182357
tic tac 500bhp build thread
http://www.imoc.co.uk/forums/viewtopic. ... 57#1182357