What fueling set up are you using for your power goals?
Size of injctors? What fuel pump? Top feed or side feed?
What turbo is used?
[Mk2] [Turbo] What Fueling Set up you using?
Moderators: IMOC Moderators, IMOC Committee Members
Re: [Mk2] [Turbo] What Fueling Set up you using?
warlboro in tank, swirl pot, Bosch 044 in boot.
1000cc delphi top feeds, GT35
1000cc delphi top feeds, GT35
Re: [Mk2] [Turbo] What Fueling Set up you using?
walbro 255
stock rail (possibly bored) with rx7 FD3S 850cc high imp injectors...(same same as sard 850s)
stock rail (possibly bored) with rx7 FD3S 850cc high imp injectors...(same same as sard 850s)
Re: [Mk2] [Turbo] What Fueling Set up you using?
Bosch external 044 in boot, AN-8 lines, Custom tank pickup.
1200cc top feeds, Aeromotive 13101 FPR
FP HTA3582r
aiming for 500~550 whp v-power
1200cc top feeds, Aeromotive 13101 FPR
FP HTA3582r
aiming for 500~550 whp v-power
Re: [Mk2] [Turbo] What Fueling Set up you using?
1200cc high imp rc engineering top feed injectors sard rail an6 lines 1 litre swirl pot bosch 044 walbro in tank borg warner s300 turbo
-
- Posts: 633
- Joined: Mon Sep 28, 2009 1:27 pm
- Location: south wales
Re: [Mk2] [Turbo] What Fueling Set up you using?
walpro 255
standard rail with blitz 850cc high impediance injectors
have a set of sard 850ccinjectors in the for sale thread like new
standard rail with blitz 850cc high impediance injectors
have a set of sard 850ccinjectors in the for sale thread like new
Re: [Mk2] [Turbo] What Fueling Set up you using?
Jaz safetank,
2xBosch 044 fuel pump,
4x 1000cc EV14 Bosch injectors,
NA 3s fuel rail(TFFR),
Aeromotive FPR
Holset HX40 Super
Goal is about 500whp dd
2xBosch 044 fuel pump,
4x 1000cc EV14 Bosch injectors,
NA 3s fuel rail(TFFR),
Aeromotive FPR
Holset HX40 Super
Goal is about 500whp dd
-
- Posts: 7172
- Joined: Thu Dec 16, 2004 6:39 pm
- Location: Oldham
Re: [Mk2] [Turbo] What Fueling Set up you using?
[was]
walbro 255 in tank
Stock rail
RX7 blitz 850's
Greddy T-67
476bhp
walbro 255 in tank
Stock rail
RX7 blitz 850's
Greddy T-67
476bhp
476bhp & 415ft lb @ 1.9bar Magic by Ryan!
Gone, but never forgotten
Now with a mk1.5 & a NHB EP3
Gone, but never forgotten
Now with a mk1.5 & a NHB EP3
Re: [Mk2] [Turbo] What Fueling Set up you using?
mark239 yours sounds exactly like where im heading.
how hard is it to fit the swirl pot and bosh pump. do you have any photo's?
good thread, giving lots of ideas
and to answer poster
currently
rev3 rail,
sard800's
walbro255
power fc @ 1.5bar = 398.7hp fly
looking to change to cope with 550-600fly
how hard is it to fit the swirl pot and bosh pump. do you have any photo's?
good thread, giving lots of ideas
and to answer poster
currently
rev3 rail,
sard800's
walbro255
power fc @ 1.5bar = 398.7hp fly
looking to change to cope with 550-600fly