The seat...
![Image](http://i68.photobucket.com/albums/i2/jeffreyduckworth/TRD/Seats/TRDSeat002.jpg)
First problem is the "TRD" logo at the top is a mixture of 2 colours - cant decide whether it should be all light and some of its dirty or all dark and some of its faded??? Can a logo be resown without stripping the seat apart?
![Image](http://i68.photobucket.com/albums/i2/jeffreyduckworth/TRD/Seats/TRDSeat003.jpg)
Unfortunatel the seat adjsutment wheel was broken in transit so I have to use a 9mm spanner to adjust the rake of the back :-( Does anyone know if you can buy recaro spares from anywahere or a way of repairing the existing wheel - just wondering whether I could use some fibreglass resin or something....?
![Image](http://i68.photobucket.com/albums/i2/jeffreyduckworth/TRD/Seats/TRDSeat006.jpg)
![Image](http://i68.photobucket.com/albums/i2/jeffreyduckworth/TRD/Seats/TRDSeat007.jpg)
![Image](http://i68.photobucket.com/albums/i2/jeffreyduckworth/TRD/Seats/TRDSeat008.jpg)
Theres a couple of small blemises in the centre material - just wndering whether anyone has used any of those fabric repoair kits with any sucess as the rest of it is like new - dont realy want to recover a whole seat for sake of these minor blemises.
![Image](http://i68.photobucket.com/albums/i2/jeffreyduckworth/TRD/Seats/TRDSeat009.jpg)
The brackets that came with it are off a JZX100 I believe and all marked with a 25 followed by a letter eg. 25A, 25B etc etc. Ive been told The SW20 MR2 ones are marked with an 18 folowed by an A, B, C etc and Ive actually read these charts somewhere on the net but now cant find it again - been all over the TRD conline catlogues but just cant find it - if anyone knows the correct reference numbers it would be much appreciated! ALternatively can anyone suggest where I can have brackets made/maybe modify my own.
Pic showing bracket with '25' on
![Image](http://i68.photobucket.com/albums/i2/jeffreyduckworth/TRD/Seats/TRDSeat005.jpg)
Finally, I think I'd like to recover my suede doorcard inserts with the same material as the centre of the seats - does anyone have experience of a place matching a material for you?
![Image](http://i68.photobucket.com/albums/i2/jeffreyduckworth/TRD/Seats/TRDSeat004.jpg)