Hi,
does anyone have a link to a picture of these off the car and fitted?
i have a handy metal fabricator who might try ande make one for me, but i just want to check the exact mounting points?
thanks
bri
[Mk2] [Turbo] Tom's underbody brace?
Moderators: IMOC Moderators, IMOC Committee Members
[Mk2] [Turbo] Tom's underbody brace?
96 Rev 3 Turbo, Done!
Re: [Mk2] [Turbo] Tom's underbody brace?
I've got a Tom's front upper and its good.
The lower is only two point so I used a Tanabe one instead.
The lower is only two point so I used a Tanabe one instead.
Re: [Mk2] [Turbo] Tom's underbody brace?
Jimbob wrote:I've got a Tom's front upper and its good.
The lower is only two point so I used a Tanabe one instead.
What does the Tanabe one look like? Just wondering where else it braces too?
Is it like this:
http://www.directtuning.com/store/pc-36 ... front.aspx
Re: [Mk2] [Turbo] Tom's underbody brace?
Yeah thats it, front points go on subframe under the rad from memory.
Re: [Mk2] [Turbo] Tom's underbody brace?
Sweet- doesn't look to difficult to make: might give it a go.
Thanks mate
Thanks mate
Re: [Mk2] [Turbo] Tom's underbody brace?
No it wouldn't be in round section, but the tanabe one is made in rectangular. I'm sure it won't make too much difference at the end of the day any additional stiffness is a bonus.............if you are trying to make the front stiffer? Stiffening the front will tend to make it oversteer.