Engine Shroud with Dual 11" Spals
Moderators: IMOC Moderators, IMOC Committee Members
Re: Engine Shroud with Dual 11" Spals
What extra screws do you need Graeme ??? For those who want to use bling screws for the cover, I have been using M12 x 1/2" self tappers. IF the holes in the lid are too big, I have filed with a bit of body filler then allowed to dry and then drilled a small guide hole for the self tappers.
Berk Tech IC, Berk Tech Downpipe, Berk Tech Exhaust, ARC Induction System, DevilsOwn Water/Meth Injection (Pre & Post turbo). TRD Cold Pipe, EMS Powered Digital Boost Gauge, TRD Strut Braces, Innovate O2, Blitz SBC i-color EBC - "ARCH ROLLER FOR HIRE"
-
- Posts: 2499
- Joined: Tue Dec 14, 2004 7:03 pm
- Location: North East
Re: Engine Shroud with Dual 11" Spals
The black ones that hold it to the lid, your shroud had 6 holes, in the middle, but mine only had 4 holding the original one in place, ddint even have the holes there, as if they were never meant to be there, but the fibreglass had the moulded bits for it
Graeme
Graeme
Re: Engine Shroud with Dual 11" Spals
The extra holes are for the engine bay temp sensor thats normally mounted on the engine lid.....maybe you made yours redundant a long time ago
Berk Tech IC, Berk Tech Downpipe, Berk Tech Exhaust, ARC Induction System, DevilsOwn Water/Meth Injection (Pre & Post turbo). TRD Cold Pipe, EMS Powered Digital Boost Gauge, TRD Strut Braces, Innovate O2, Blitz SBC i-color EBC - "ARCH ROLLER FOR HIRE"
-
- Posts: 2499
- Joined: Tue Dec 14, 2004 7:03 pm
- Location: North East
Re: Engine Shroud with Dual 11" Spals
I figured those ones out, I mean other ones, Ill show you next time im round lol
Graeme
Graeme
fans in tthe rain
ive fitted my fans, looks good, and nearly lifts off its that powerful! i use my turbo mr2 every day, and was wondering if its going to be ok in the rain ect? the rain used to run off to the left, but now will go straight through the fans onto the engine.
anybody had any probs with this?
anybody had any probs with this?
Re: Engine Shroud with Dual 11" Spals
Luke when your travelling its not too much foan issue the Heat and the motion means very little rain gets in. and if it does then its normally boiled off.
However park your car up for the night and it rains non stop then you will get alot of water through there. I bought a cover that goes over the rear of the car covering the Engine vents and directing the water straight onto the bootlit. dont have the car any more but i still have the cover somewhere will dig it out if you want it
However park your car up for the night and it rains non stop then you will get alot of water through there. I bought a cover that goes over the rear of the car covering the Engine vents and directing the water straight onto the bootlit. dont have the car any more but i still have the cover somewhere will dig it out if you want it
Re: Engine Shroud with Dual 11" Spals
tiny, sent u a pm. tat would be great if you could send it to me
cheers
luke
cheers
luke
Re: Engine Shroud with Dual 11" Spals
I now have four of these left from the 2nd batch. After these no more will be ordered so grab em whilst you can.
Price on application as there are minor increases due to cost of shipping and materials increasing very slightly.
Still supplied with everything you need:
Pre cut shroud in Mirror finish stainless steel
11" Spal fans - Cureved blade hi Power
Fused Relay
A2 Marine grade fastenings for the fans
Nylon Stand-off's for the fans
All spade connectors and boots
Shipping via UPS on a next working day delivery.
I also have one very special shroud kit, this had TRD2000GT cut between the fans and can be backlit with leds of any colour, make a very impressive shroud.
Price on application as there are minor increases due to cost of shipping and materials increasing very slightly.
Still supplied with everything you need:
Pre cut shroud in Mirror finish stainless steel
11" Spal fans - Cureved blade hi Power
Fused Relay
A2 Marine grade fastenings for the fans
Nylon Stand-off's for the fans
All spade connectors and boots
Shipping via UPS on a next working day delivery.
I also have one very special shroud kit, this had TRD2000GT cut between the fans and can be backlit with leds of any colour, make a very impressive shroud.
Berk Tech IC, Berk Tech Downpipe, Berk Tech Exhaust, ARC Induction System, DevilsOwn Water/Meth Injection (Pre & Post turbo). TRD Cold Pipe, EMS Powered Digital Boost Gauge, TRD Strut Braces, Innovate O2, Blitz SBC i-color EBC - "ARCH ROLLER FOR HIRE"
Re: Engine Shroud with Dual 11" Spals
Oooh gonna be on the market very soon for one of these if you still got some could you pm me a price for one please
Thanks Mike
Thanks Mike
-
- Posts: 214
- Joined: Fri Jul 31, 2009 7:59 am
- Location: Swindon
Re: Engine Shroud with Dual 11" Spals
could u pm me your cheapest price please?
-
- Posts: 319
- Joined: Sun Jul 26, 2009 8:26 am
Re: Engine Shroud with Dual 11" Spals
notroubleclubber wrote:could u pm me your cheapest price please?
me too!!
thanks
-
- Posts: 319
- Joined: Sun Jul 26, 2009 8:26 am
Re: Engine Shroud with Dual 11" Spals
notroubleclubber wrote:could u pm me your cheapest price please?
me too!!
thanks
Re: Engine Shroud with Dual 11" Spals
PM Sent to both people.
Please be aware that the last remaining few our going fast, lots of interest on them but as I've told everyone its first with the payment gets the goodies, once these have gone I wont be doing any more as I want to ensure the ones in circulation remain a bit unique.
Thanks
Graeme
Please be aware that the last remaining few our going fast, lots of interest on them but as I've told everyone its first with the payment gets the goodies, once these have gone I wont be doing any more as I want to ensure the ones in circulation remain a bit unique.
Thanks
Graeme
Berk Tech IC, Berk Tech Downpipe, Berk Tech Exhaust, ARC Induction System, DevilsOwn Water/Meth Injection (Pre & Post turbo). TRD Cold Pipe, EMS Powered Digital Boost Gauge, TRD Strut Braces, Innovate O2, Blitz SBC i-color EBC - "ARCH ROLLER FOR HIRE"
Re: Engine Shroud with Dual 11" Spals
Last two remaining now..... One with TRD2000GT Logo (which we can backlight in any colour)
Once their gone thier gone for good.
Graeme
Once their gone thier gone for good.
Graeme
Berk Tech IC, Berk Tech Downpipe, Berk Tech Exhaust, ARC Induction System, DevilsOwn Water/Meth Injection (Pre & Post turbo). TRD Cold Pipe, EMS Powered Digital Boost Gauge, TRD Strut Braces, Innovate O2, Blitz SBC i-color EBC - "ARCH ROLLER FOR HIRE"
Re: Engine Shroud with Dual 11" Spals
Hi there, could you PM me a reasonable price, and all being well, i'll take one
Cheers,
Scott.
Cheers,
Scott.
-
- Posts: 139
- Joined: Tue Aug 05, 2008 3:45 pm
Re: Engine Shroud with Dual 11" Spals
pm me too how much for the trd one
Re: Engine Shroud with Dual 11" Spals
liamdavies wrote:pm me too how much for the trd one
Unfortunately the last TRD one has now gone.
Very sorry
Graeme
Berk Tech IC, Berk Tech Downpipe, Berk Tech Exhaust, ARC Induction System, DevilsOwn Water/Meth Injection (Pre & Post turbo). TRD Cold Pipe, EMS Powered Digital Boost Gauge, TRD Strut Braces, Innovate O2, Blitz SBC i-color EBC - "ARCH ROLLER FOR HIRE"
Re: Engine Shroud with Dual 11" Spals
Hey graeme, you dont by chance have any of the stainless mirror shrouds spare to sell do you? mine has got a bit tatty from installing it wrong! and using the wrong polish on it
Thanks bud
Thanks bud
Re: Engine Shroud with Dual 11" Spals
RyanRs wrote:Hey graeme, you dont by chance have any of the stainless mirror shrouds spare to sell do you? mine has got a bit tatty from installing it wrong! and using the wrong polish on it
Thanks bud
Morning Bud,
Sorry for not getting to you last night...... I will have a look in the garage, I MAY have something, give me a day or two and I will come back to you.
Berk Tech IC, Berk Tech Downpipe, Berk Tech Exhaust, ARC Induction System, DevilsOwn Water/Meth Injection (Pre & Post turbo). TRD Cold Pipe, EMS Powered Digital Boost Gauge, TRD Strut Braces, Innovate O2, Blitz SBC i-color EBC - "ARCH ROLLER FOR HIRE"
Re: Engine Shroud with Dual 11" Spals
No spal fans left that go in the oem opening of the rainshield, above the airfilter?
Or know what size spal does fit there.
Or know what size spal does fit there.