Hi there,
I have a Rev2 Turbo with a Rev3 type viscous LSD. My gearbox has died, and I may have a turbo NON-LSD gearbox available - I've heard I need the driveshafts off the NON-LSD turbo to match the gearbox, is that correct??
Cheers!
A
[Mk2] [Turbo] Rev 2 Turbo Gearbox
Moderators: IMOC Moderators, IMOC Committee Members
Re: [Mk2] [Turbo] Rev 2 Turbo Gearbox
that is correct mate, as you can see from the pics in this thread the splines are different
http://www.imoc.co.uk/forums/viewtopic. ... hlight=lsd
http://www.imoc.co.uk/forums/viewtopic. ... hlight=lsd
Re: [Mk2] [Turbo] Rev 2 Turbo Gearbox
Splines are different length but they will still fit.
Re: [Mk2] [Turbo] Rev 2 Turbo Gearbox
So looking at the pictures, and what Lewis Jay said - going from LSD to NON-LSD is ok, that will work, but going from NON-LSD to LSD *wont* work??
Thanks
Andy
Thanks
Andy
Re: [Mk2] [Turbo] Rev 2 Turbo Gearbox
The splines should fit either way, i have tried them before.
I think they just did it to strenghthen the engagement on the LSD shaft.
I think they just did it to strenghthen the engagement on the LSD shaft.