[Mk2] [Turbo] another one bites the dust: New Update 17/10/09
Moderators: IMOC Moderators, IMOC Committee Members
-
- Posts: 9202
- Joined: Tue Dec 14, 2004 12:15 pm
- Location: Crawley, West Sussex
- Contact:
Re: [Mk2] [Turbo] another one bites the dust: New Update 17/10/09
Where did you get the dash flocked? I've been looking into this for the last couple months on and off while waiting for my car, have only really found 1 or 2 that people recommend. Good to see it on an MR though, even if I am slightly gutted its not mine
-
- Posts: 2230
- Joined: Wed Dec 15, 2004 3:08 pm
- Location: Stourbridge
Re: [Mk2] [Turbo] another one bites the dust: New Update 17/10/09
oBladeo wrote:
Whats next on the shopping list?
Not a lot, just start rebuilding the engine though i do need a few bits more to start that......
450wbhp comming soon
-
- Posts: 2230
- Joined: Wed Dec 15, 2004 3:08 pm
- Location: Stourbridge
Re: [Mk2] [Turbo] another one bites the dust: New Update 17/10/09
cantfindausername wrote:Where did you get the dash flocked? I've been looking into this for the last couple months on and off while waiting for my car, have only really found 1 or 2 that people recommend. Good to see it on an MR though, even if I am slightly gutted its not mine
adam3442 did it, not sure if he goes by that name on here.
450wbhp comming soon
Re: [Mk2] [Turbo] another one bites the dust: New Update 17/10/09
Theses do flocking to
www.suffolkflockingservices.co.uk
cost my mate £130 including postage both ways. You have to take it out yourself tho
www.suffolkflockingservices.co.uk
cost my mate £130 including postage both ways. You have to take it out yourself tho
Henry Ford "Any customer can have a car painted any colour that he wants so long as it is black"
Modifying a 1 liter is like giving my granny a E. It’s just wrong!!
Modifying a 1 liter is like giving my granny a E. It’s just wrong!!
-
- Posts: 9202
- Joined: Tue Dec 14, 2004 12:15 pm
- Location: Crawley, West Sussex
- Contact:
Re: [Mk2] [Turbo] another one bites the dust: New Update 17/10/09
Yeah had a quote from them ages ago. But have heard that the turn around time is shocking. I'm looking at flockit.eu at the mo.
-
- Posts: 2230
- Joined: Wed Dec 15, 2004 3:08 pm
- Location: Stourbridge
Re: [Mk2] [Turbo] another one bites the dust: New Update 17/10/09
Not been on here much but thought i'd show how how its looking now.......... Finished the engine cover at last, just the twin spal fans to fit
New paint and lots of Carbon.................
What doesn't show up well in the pics is the red micro flake thats over everything thats carbon and black.
Still got some parts to fit, carbon headlightcovers black mirrors and a carbon bit between the rear lights......
Now starting the engine as i have everything to finish that so should be done end of March
New paint and lots of Carbon.................
What doesn't show up well in the pics is the red micro flake thats over everything thats carbon and black.
Still got some parts to fit, carbon headlightcovers black mirrors and a carbon bit between the rear lights......
Now starting the engine as i have everything to finish that so should be done end of March
450wbhp comming soon
Re: [Mk2] [Turbo] another one bites the dust: New Update 17/10/09
Liking the look chap, modestly done, was gonna mention mirrors and headlight covers but they're already in the pipeline
I think its always tricky to know how to finish the 2 tone at the back if you continue on the engine lid and boot, but should look good with the centre panel too. Have you thought about smoked front lenses?
I think its always tricky to know how to finish the 2 tone at the back if you continue on the engine lid and boot, but should look good with the centre panel too. Have you thought about smoked front lenses?
Last edited by Leon. on Mon Feb 16, 2009 7:40 pm, edited 1 time in total.
Re: [Mk2] [Turbo] another one bites the dust: New Update 17/10/09
Wow looking great
Every cloud and all that
Every cloud and all that
Re: [Mk2] [Turbo] another one bites the dust: New Update 17/10/09
...
Last edited by Harry on Sun Apr 20, 2014 6:29 am, edited 1 time in total.
Re: [Mk2] [Turbo] another one bites the dust: New Update 17/10/09
absoloutely loving your choice of exterior/body mods m8.
tom's front looks awesome, really complements the trd spoiler and that engine bay cover is
top marks m8
tom's front looks awesome, really complements the trd spoiler and that engine bay cover is
top marks m8
Re: [Mk2] [Turbo] another one bites the dust: New Update 17/10/09
...
Last edited by Harry on Wed Nov 18, 2009 3:53 pm, edited 1 time in total.
-
- Posts: 2230
- Joined: Wed Dec 15, 2004 3:08 pm
- Location: Stourbridge
Re: [Mk2] [Turbo] another one bites the dust: New Update 17/10/09
Harry wrote: bet there is some engine tuning going on too
All brought and ready for the build
CP Custom Forged Pistons
Eagle Con Rods
Clevite Bearings
Arp Main Bolts
Arp Head Bolts
Arp Flywheel Bolts
Fidanza lightened flywheel
RPS 450ft/LBS Clutch ( to be uprated)
Garret Turbocharger GT3076r with external waste gate
HKS Super Sequential Dump Valve
Piper Custom Cams and double springs
HKS Duralumin Adjustable Cam Pulleys
Ferrea competetion Valves +1mm
WON Direct Port N.O.S.
Aquamist Water/Methonal Injection
Apexi Electronic Boost Controler
Apexi Power FC plus Commander
TRD Ignition Leads
HKS Fine tune Timing Belt
HKS Twin Power ignition amplifier
Wolfkats Rev 3 turbo fuel rail and 1000cc injector package
Aeromotive 13109 Fuel Pressure Regulator
SX Pump
SX Fuel Filter
Custom Swirl Pot
GReddy intercooler
Twin Spal fans
Custom Water system
Blitz NUR spec exhaust
ATS Racing CV joints
Brass shifter bushing
TRD engine mounts
Strut Brace Bar Set
Tein HR Coilovers
Drilled Discs with Carbotec Pads
Poly bushes alround
450wbhp comming soon
Re: [Mk2] [Turbo] another one bites the dust: New Update 17/10/09
slight understatement harry! LOL ^^^^^^^^
Harry wrote:The TRD aero wing's blade is carbon fiber - bet there is some engine tuning going on too
-
- Posts: 2230
- Joined: Wed Dec 15, 2004 3:08 pm
- Location: Stourbridge
Re: [Mk2] [Turbo] another one bites the dust: New Update 17/10/09
Started the final leg.....................
Friday took the b1tch to Pip at WGT to be mapped and within an hr it was mapped up to 1bar and 399bhp.
After a dinner break we were going to go to 1.6bar but the boost kept tailing of around 7000revs which we put down to a low spring in the Tial wastegate so it was pointless going for 1.5bar.
In a few weeks we'll be back with a bigger spring to finish it off but for now I'm at 441.8bhp @1.3bar and 362.5 lbft torque. be interesting to see what she makes at 1.6 bar with the direct port NOS thats already in and ready to go
This is all finished and tidy now.................
Friday took the b1tch to Pip at WGT to be mapped and within an hr it was mapped up to 1bar and 399bhp.
After a dinner break we were going to go to 1.6bar but the boost kept tailing of around 7000revs which we put down to a low spring in the Tial wastegate so it was pointless going for 1.5bar.
In a few weeks we'll be back with a bigger spring to finish it off but for now I'm at 441.8bhp @1.3bar and 362.5 lbft torque. be interesting to see what she makes at 1.6 bar with the direct port NOS thats already in and ready to go
This is all finished and tidy now.................
450wbhp comming soon
Re: [Mk2] [Turbo] another one bites the dust: New Update 17/10/09
Looks impressive !
No problems with air temps at the moment ?? I guess this time of year not too much of an issue.. but when it gets warmer, running anything more than 1.4 bar on a side mount is pointless IMO.
Wouldn't like you to be disspointed at a limiting factor to your setup !
No problems with air temps at the moment ?? I guess this time of year not too much of an issue.. but when it gets warmer, running anything more than 1.4 bar on a side mount is pointless IMO.
Wouldn't like you to be disspointed at a limiting factor to your setup !
|| S256SX Airwerks Powered MR2 Turbo || V10 BMW M5 ||
-
- Posts: 2230
- Joined: Wed Dec 15, 2004 3:08 pm
- Location: Stourbridge
Re: [Mk2] [Turbo] another one bites the dust: New Update 17/10/09
I want to see how far it will go on a sidemount and we've changed the cooling system. All during mapping, and you know how many power runs it takes, the air intake didn't go above 50 degree's, water stayed at a nice 82-84 degree's even with the big block of the dynopak blocking most of the side intake. I was suprised how cool it stayed
450wbhp comming soon
-
- Posts: 2230
- Joined: Wed Dec 15, 2004 3:08 pm
- Location: Stourbridge
Re: [Mk2] [Turbo] another one bites the dust: New Update 17/10/09
Just ment to say that it will only be run at 1bar on the road, bigger boost will be for the strip only.
450wbhp comming soon
-
- Posts: 2559
- Joined: Fri Mar 18, 2005 2:09 am
- Location: London
Re: [Mk2] [Turbo] another one bites the dust: New Update 17/10/09
Been inactive fora good while while my own car was off the road, so only just seen this whole thread. Um, I'm late for everything so...sorry about you smash, um, congrats on teh insurance payout, errrrrr...., good find with the new car,eeee.......nice parts bought, coming along nicely.......and, um, good results so far with the engine build.....
...I think that just about brings me up to date!
B
...I think that just about brings me up to date!
B
Re: [Mk2] [Turbo] another one bites the dust: New Update 17/10/09
...
Last edited by Harry on Wed Nov 18, 2009 3:56 pm, edited 1 time in total.
-
- Posts: 2230
- Joined: Wed Dec 15, 2004 3:08 pm
- Location: Stourbridge
Re: [Mk2] [Turbo] another one bites the dust: New Update 17/10/09
Should be hittin the 5oo bhp soon Harry
Resprayed the dash to be more inkeepin with the current paint scheme....... shame the guages and wheel don't match now . lol
Resprayed the dash to be more inkeepin with the current paint scheme....... shame the guages and wheel don't match now . lol
450wbhp comming soon