[Mk2] [Turbo] Best place for Stage 1 CT20

[mr2nut123]

Got a CT20 thats going and need to be rebuilt to Stage 1 spec so everything is steel. Any suggestions on companies?

[Andy F]

Try AET at normanton matey
http://www.aet-turbos.co.uk/

[mr2nut123]

Try AET at normanton matey
http://www.aet-turbos.co.uk/

Cheers

[bobhatton]

Got a CT20 thats going and need to be rebuilt to Stage 1 spec so everything is steel. Any suggestions on companies?

I can supply you all the parts if you want to rebuild it your self.

Bob

[Dan88]

ive heard that rebuiliding it yourself is not a hard job, but its the balancing that you need to get done by professional, is this correct?

[bobhatton]

No it is not a hard job at all.
It only needs balancing it one of the wheels are changed.
If the turbo only needs bearings and seals then as long as the turbine shaft and comp wheel are marked up and replaced in the same place then no balancing is needed.

I can get every part for the CT26 and CT26 small as the CT20b should be called.

The comp wheel is bigger on the CT20b but the turbine wheel is smaller than the CT26. I feel the best match would be a CT20b comp wheel on a CT26.

Bob

[mr2nut123]

Cheers for the offer but i'm gonna leave it to the pros for peace of mind.