Making of a Mk1.6 (slowly)

V6? V8? TDI? Discussion and technical advice for engine transplants inc. 5SFE & 5SGTE builds. Not for N/A to Turbo, or Rev1/2 to 3+ conversions.
Project and build threads welcome.

Moderators: IMOC Moderators, IMOC Committee Members

vashy
Posts: 481
Joined: Wed Dec 15, 2004 10:29 pm
Location: Bristol

Re: Making of a Mk1.6 (slowly)

Post by vashy »

haha! that must be the dirty throttles picture! 8-[

Chris, no probs mate :mrgreen:

vid request! another vid when you have the throttles closed a bit more and balanced up please (: and perhaps a little rev (: with a shot of your lit up dash too! 8)

hmmm I wonder if you can get an MOT with a 3000rpm idle :whistle:
. . 6 . 7 . 8
5 . . . . i . . 9
cartledge_uk
Posts: 7608
Joined: Sun Nov 13, 2005 6:28 pm
Location: Newbury

Re: Making of a Mk1.6 (slowly)

Post by cartledge_uk »

vashy wrote:
hmmm I wonder if you can get an MOT with a 3000rpm idle :whistle:


I would like to know, becasue thats my problme too at the moment. :lol:
User avatar
LimeyMk1
IMOC Committee
Posts: 11200
Joined: Thu Oct 04, 2007 9:28 am
Location: Gosport

Re: Making of a Mk1.6 (slowly)

Post by LimeyMk1 »

:lol: I'll se what I can do re the vid Vash but I won't get much more garage time until after Christmas, the ITBs are already closed down. I've got to change the coolant on the Hi-lux tomorrow seeing as it's got just water in it at the moment. I was lucky not to have a split rad from it freezing up on Friday. #-o F'in garages doing a halfarsed job. :roll:
User avatar
LimeyMk1
IMOC Committee
Posts: 11200
Joined: Thu Oct 04, 2007 9:28 am
Location: Gosport

Re: Making of a Mk1.6 (slowly)

Post by LimeyMk1 »

Thought I'd put a wee vid up of the beast, after four years stuck in the garage we decided to get her out for a wash/claybar and polish. You may wanna turn down your volume :lol:

http://www.youtube.com/watch?v=mBSaL8HJ ... ture=share
vashy
Posts: 481
Joined: Wed Dec 15, 2004 10:29 pm
Location: Bristol

Re: Making of a Mk1.6 (slowly)

Post by vashy »

:+: :+: :+: I turned my speakers up :) good to see it roll! looks really nice all shiny. and loving that rear wing :twisted:
. . 6 . 7 . 8
5 . . . . i . . 9
User avatar
LimeyMk1
IMOC Committee
Posts: 11200
Joined: Thu Oct 04, 2007 9:28 am
Location: Gosport

Re: Making of a Mk1.6 (slowly)

Post by LimeyMk1 »

Dyno booked for the 27th June @ Surrey rolling road. Ed from Fusion Motorsports is doing the honours. :mrgreen:
User avatar
toxo
IMOC Committee
Posts: 11345
Joined: Tue May 30, 2006 5:41 pm
Location: The Toast Aisle
Contact:

Re: Making of a Mk1.6 (slowly)

Post by toxo »

Limeymk1 wrote:Dyno booked for the 27th June @ Surrey rolling road. Ed from Fusion Motorsports is doing the honours. :mrgreen:


Tell him to reply to my sodding email when you see him :mrgreen:
IMOC-UK - the only club to win 'Best Club Stand' at JAE more than once, and twice in a row!
User avatar
LimeyMk1
IMOC Committee
Posts: 11200
Joined: Thu Oct 04, 2007 9:28 am
Location: Gosport

Re: Making of a Mk1.6 (slowly)

Post by LimeyMk1 »

toxo wrote:
Limeymk1 wrote:Dyno booked for the 27th June @ Surrey rolling road. Ed from Fusion Motorsports is doing the honours. :mrgreen:


Tell him to reply to my sodding email when you see him :mrgreen:


Sorry, forgot to give Ed a boot dude. #-o

Well she put down 182.3 bhp (6800rpm) with about 170 Ibft torque (about 4000 rpm) but that's without VVTi and the ITBs still need some balancing. Both Ed (Fusion Motorsport) & Charlie (Surrey Rolling Road) rechon she has much more to give.:mrgreen:

Vid on youtube:

http://www.youtube.com/watch?v=nD6dz7yBj5M

http://www.youtube.com/watch?v=sg528g3SmGc

Piccies:

Image

Image

Image
Enneaitch
Posts: 42
Joined: Sat Jul 09, 2011 8:32 pm

Re: Making of a Mk1.6 (slowly)

Post by Enneaitch »

very tasty!! any vids of this running bet its a machine?
User avatar
LimeyMk1
IMOC Committee
Posts: 11200
Joined: Thu Oct 04, 2007 9:28 am
Location: Gosport

Re: Making of a Mk1.6 (slowly)

Post by LimeyMk1 »

After failing MoT on welding I've done one side:

Chopped:
Image

Fettled to fit:
Image

Tacked & blown in one place: :lol:
Image

Ground back and POR15'd:
Image

Got these to go on at some point in life, has to be the most expensive way to level the headlights :lol:
Image
Last edited by LimeyMk1 on Mon Mar 05, 2012 10:07 pm, edited 1 time in total.
Icsunonove
Posts: 6149
Joined: Tue Jan 25, 2005 10:37 am
Location: Market Drayton Shropshire
Contact:

Re: Making of a Mk1.6 (slowly)

Post by Icsunonove »

Good stuff Chris! :D :thumleft:
User avatar
LimeyMk1
IMOC Committee
Posts: 11200
Joined: Thu Oct 04, 2007 9:28 am
Location: Gosport

Re: Making of a Mk1.6 (slowly)

Post by LimeyMk1 »

Icsunonove wrote:Good stuff Chris! :D :thumleft:


Still got the other side to do Tom (same again). Hopefully won't take me as long, just need to get the car turned round so I can access that side in the garage.

The only bit of metal that had failed was an old patch that must have been put on the car before I got her. #-o
vashy
Posts: 481
Joined: Wed Dec 15, 2004 10:29 pm
Location: Bristol

Re: Making of a Mk1.6 (slowly)

Post by vashy »

cool cool 8)

What´s left on the MOT list then chris? At the weekend I picked up a magazine with an article about the new MOT regs. It said that there was an amnesty until the first of April, until then you only get an advisory that it will fail next time :!:
. . 6 . 7 . 8
5 . . . . i . . 9
User avatar
LimeyMk1
IMOC Committee
Posts: 11200
Joined: Thu Oct 04, 2007 9:28 am
Location: Gosport

Re: Making of a Mk1.6 (slowly)

Post by LimeyMk1 »

Just need to weld up the other side then noise (or friendly MoT) and emissions.

I'm hoping to chat to the guy who does the MoT and see if I can sit with the laptop and adjust the fuelling/timing to bring the emissions into line for the idle and 3000 rpm slots on the test so she passes then get Ed to adjust the full map to improve the fuelling.

I guess it didn't help that the initial mapping was done on one of the hottest days of the year last year. #-o
User avatar
LimeyMk1
IMOC Committee
Posts: 11200
Joined: Thu Oct 04, 2007 9:28 am
Location: Gosport

Re: Making of a Mk1.6 (slowly)

Post by LimeyMk1 »

Got the evil wench out of the garage today and had another go at the ITBs, got them a little better than in the piccy.

Image

Wish I'd had the camera on video as she emitted the loudest backfire I've heard yet when I turned the ignition on to start balancing, set the neighbourhood dogs off rattled the garage and earned a WTF! from a nearby garden. :lol:

Had a dig at the welding I need to do, done this side already:

Image

(nice stance with the BC coilovers fitted, thanks for the assist Vashy) :mrgreen:

Chewing gum anyone:

Image

Bit rusty:

Image

Initial chop:

Image

Got bored and put her away, got stuff to do. 8-[
vashy
Posts: 481
Joined: Wed Dec 15, 2004 10:29 pm
Location: Bristol

Re: Making of a Mk1.6 (slowly)

Post by vashy »

Limeymk1 wrote:Got the evil wench out of the garage today
I love the names you come up with for her :lol: (and after working on her, I know why you do!)

Limeymk1 wrote:Wish I'd had the camera on video as she emitted the loudest backfire I've heard yet when I turned the ignition on to start balancing, set the neighbourhood dogs off rattled the garage and earned a WTF! from a nearby garden. :lol:

:lol: remember the scene in Gone in Sixty Seconds when Memphis is anxious, scared even, about driving Eleanor? I think that´s what driving El will be like :mrgreen:
. . 6 . 7 . 8
5 . . . . i . . 9
User avatar
tonigmr2
IMOC Committee
Posts: 18054
Joined: Wed Dec 15, 2004 2:30 pm
Location: Here

Re: Making of a Mk1.6 (slowly)

Post by tonigmr2 »

That is the biggest exhaust I have ever seen on a MK1. :mrgreen:
User avatar
LimeyMk1
IMOC Committee
Posts: 11200
Joined: Thu Oct 04, 2007 9:28 am
Location: Gosport

Re: Making of a Mk1.6 (slowly)

Post by LimeyMk1 »

vashy wrote:
Limeymk1 wrote:Got the evil wench out of the garage today
I love the names you come up with for her :lol: (and after working on her, I know why you do!)

Limeymk1 wrote:Wish I'd had the camera on video as she emitted the loudest backfire I've heard yet when I turned the ignition on to start balancing, set the neighbourhood dogs off rattled the garage and earned a WTF! from a nearby garden. :lol:

:lol: remember the scene in Gone in Sixty Seconds when Memphis is anxious, scared even, about driving Eleanor? I think that´s what driving El will be like :mrgreen:


She's a wee biatch. :lol:

I gave her a bit of a boot down the alleyway when putting her away and she had a nice wiggle. :mrgreen:

I admit I was showing off, there were some folks coming out of the park. 8-[

I bought the exhaust cos it was supposed to be the quietest aftermarket tubby box around. Didn't work out that way when stuck on my bloody car. :roll:
User avatar
LimeyMk1
IMOC Committee
Posts: 11200
Joined: Thu Oct 04, 2007 9:28 am
Location: Gosport

Re: Making of a Mk1.6 (slowly)

Post by LimeyMk1 »

Just waved her off on a car transporter, hopefully back in 2 weeks with the passenger side welded up and some fresh paint on her. :mrgreen:
Magic Beans
Posts: 4789
Joined: Thu Nov 24, 2011 1:01 pm

Re: Making of a Mk1.6 (slowly)

Post by Magic Beans »

I saw the videos of the start-up etc on YouTube some time back. My first thoughts were "F me that's loud!" followed by "I hope the neighbours are understanding, or deaf!" :mrgreen:

Not exactly a stealth machine is she :lol:
Post Reply

Return to “MR2 Engine Swaps”