www.imoc.co.uk

Can someone point me in the direction of where I can get some slightly longer front wheel studs? The wheels i'm fitting take a 8mm spacer up front to clear the brakes and coil overs. there not much left on the thread to bite upto.

boo only just noticed these, could have done with them but there now gone

time for a bit of wheel bling, going to need some spacers, catching the brakes and the coil covers on the front

didnt know they were worth that much, I think ill get them on ebay , mine were only refurbed 2000 miles or less ago even got the centre caps, tyres are bridgestone re02 extreme's.

How much are SA3's selling for these days. just about to take mine of my 2, cant decide if I want to sell them or not.

This may be worth a quick check, im not saying its the problem, I had these issues a couple of months ago, turned out a replacement ecu had 2 blown caps in causing this problem. its only 4 screws on the ecu top plate to check.

Some more has been done, http://s8.postimg.org/r4ntlygg1/IMG_0773.jpg http://s8.postimg.org/erazf1qrl/IMG_0774.jpg http://s8.postimg.org/ijuhus69t/IMG_0775.jpg http://s8.postimg.org/ixvtudqdd/IMG_0776.jpg Taking out the old alarm and imb, its been shafted since id purchase of the car. replaced all s...

fuel rail and throttle body fitted, just doing a bit of loom relocation. Need to run some new VAC lines, work out the length of the new fuel lines.

well new injectors fits, well that happens when you buy the right ones

Well ended up changing the injectors the new ones should be with me for tomorrow. Needed some 14mm feeds rather than 11mm

So the build continues

http://s11.postimg.org/nyu62rxe7/IMG_0743.jpg New CB bonnet getting sprayed SMG http://s11.postimg.org/wwew04pu7/IMG_0744.jpg Old inlet manifold http://s11.postimg.org/t3zyy4zpr/IMG_0753.jpg New racer X, also new throttle body and new intercooling hosing. http://s11.postimg.org/qjzqqamrz/IMG_0754.j...

dropped the ball on some parts ordering a couple of weeks ago only just come to light :< me been a noob, my racer X fuel rail is ....... top feed & the injectors I have are side feed. Top feeds on route just not going to get them till Wednesday next week. so at the moment ive got 3 sets of injec...

sorry why no coilovers?

I've just removed my billies with uprated top mounts and springs. all of it in good working order & my car has been recently had its poly bushes replaced. I just didn't find it anywhere near as good as these coilovers in all situations.

I've was in the same place, In the end i just decided to purchase these:- http://www.meisterr.co.uk/vehicles/toyota/mr2-sw20/ Come with drop links, Pillow ball mounts. These transformed my car, granted ive only done 700 miles on them on low boost. but these are on another level compared to the stock...

yes your likely to find whats not right, caliper is normally fine, its the slider pins that normally need replacing due to be pitted and corrosion. pistons will need freeing back up. Normally I take the caliper off the hub and leave it connected to the brake line. take the pads out and put wood in t...

Well... I was expecting to be finished, however my ep3 decided it wanted a new timing chain, so build resumes middle of next week, got some slick wheels last week, also adding carbon bonnet and pop light delete to the list of things. The camera will be coming out soon. running in completed, all the ...

replacing the turbo expect £250+ on labour. What ever your doing with the turbo, reconditioning or replacement. + oil, coolant, all turbo gaskets, exhaust gaskets, possible replacement lines depends on the condition to be factored in as well. If its the turbo anyway :) i'm sure there more bits that ...

could just be moisture in the exhaust from a cold start, all its been doing is raining the last few months. better description of the smoke would help.

when my ct26 started to died, hot or cold. hello smoke, every time I used the throttle from stationary or spooling up.

Pm'ed you

well quick update,

Rear spats are now SMG Silver,

I've completed the running in mileage, Its just back in the garage having the racerX stuff installed as we speak, some new photo's will be incoming soon.