Search found 3774 matches
- Thu Aug 10, 2023 8:08 am
- Forum: MR2 MK2 1990 - 1999 NA & Turbo
- Topic: Which colour tint for UK Rev 1 windscreen?
- Replies: 3
- Views: 1003
Re: Which colour tint for UK Rev 1 windscreen?
Thanks for responding Jimi, it's appreciated. I ended up giving my chassis number to my local Toyota parts dept on the pretext of ordering one from them (they can't get them anymore though... discontinued!) and they told me it's listed as a green tint for my particular car. Putting a bit of clean wh...
- Tue Aug 08, 2023 4:54 pm
- Forum: MR2 MK2 1990 - 1999 NA & Turbo
- Topic: Which colour tint for UK Rev 1 windscreen?
- Replies: 3
- Views: 1003
Which colour tint for UK Rev 1 windscreen?
As above. I need yet another new windscreen for my 1991 UK Rev 1 T- bar (a not often recognised issue with potholes ... the loose debris they leave ready to be flicked up and thrown back by the vehicle in front!). The question I'm being asked by the insurance company is which colour tint is required...
- Fri Apr 14, 2023 6:18 pm
- Forum: MR2 MK2 1990 - 1999 NA & Turbo
- Topic: How many different dizzy caps/leads through the Revs?
- Replies: 3
- Views: 808
Re: How many different dizzy caps/leads through the Revs?
Thanks for the replies guys.
Now have a genuine Toyota one sitting on my table ready to go on courtesy of MR2 Ben.
Now have a genuine Toyota one sitting on my table ready to go on courtesy of MR2 Ben.
- Tue Apr 11, 2023 5:22 pm
- Forum: MR2 MK2 1990 - 1999 NA & Turbo
- Topic: How many different dizzy caps/leads through the Revs?
- Replies: 3
- Views: 808
How many different dizzy caps/leads through the Revs?
As above really. I went to replace the distributor cap and rotor arm on my (as far as I'm aware) bog standard UK MK2 Rev1 N/A but found the supplied dizzy cap had too small a central hole for the King lead. Were there multiple different specs... Rev1 different to Rev2? Both different to Rev3 and on?...
- Thu Nov 24, 2022 12:37 pm
- Forum: Mechanical
- Topic: What diameter Anti Roll Bar for '91 Rev 1?
- Replies: 0
- Views: 1908
What diameter Anti Roll Bar for '91 Rev 1?
As above really. Does anyone know what size is standard for a UK '91 Rev1 N/A? MOT advisories include 'Anti-roll bar pin or bush worn but not resulting in excessive movement both Nearside and Offside Front'. As far as I'm aware there is no 'pin' (unless they mean the drop links?) but I've seen liste...
- Fri Sep 09, 2022 5:26 pm
- Forum: MR2 MK2 1990 - 1999 NA & Turbo
- Topic: Refreshing/Conditioning T-bar rubbers... how?
- Replies: 2
- Views: 917
Re: Refreshing/Conditioning T-bar rubbers... how?
Hellooo.... helloooo.....
Nobody?
Nobody?
- Tue Aug 30, 2022 11:11 pm
- Forum: MR2 MK2 1990 - 1999 NA & Turbo
- Topic: Refreshing/Conditioning T-bar rubbers... how?
- Replies: 2
- Views: 917
Refreshing/Conditioning T-bar rubbers... how?
Evening all, I have a question for you as per the title really.
What should be used on the T bar/door rubbers to keep them supple and thus water resistant?
Silicon based? Non Silicon?
Any recommendations of products used?
What should be used on the T bar/door rubbers to keep them supple and thus water resistant?
Silicon based? Non Silicon?
Any recommendations of products used?
- Mon Apr 18, 2022 9:19 pm
- Forum: Modifications
- Topic: Rev 2-5 gear knob in Rev 1?
- Replies: 4
- Views: 1089
Re: Rev 2-5 gear knob in Rev 1?
Thanks Wilkie. Yeah I don't fancy going for a short shifter again but I may at some point try a later rev stick/knob now I know they're interchangeable. I thought they were but wasn't sure so thanks for that. PS. Is it only you I and a few other lost souls left on this forum? It seems a very quiet p...
- Sat Apr 09, 2022 1:54 am
- Forum: Modifications
- Topic: Rev 2-5 gear knob in Rev 1?
- Replies: 4
- Views: 1089
Rev 2-5 gear knob in Rev 1?
If anybody can let me know it would be great. Years ago I had the TRD short shifter in my white Rev1 but it was actually too short and was ball shaped and I found I couldn't use it as I did the tall standard item but I'm wondering if the later revs just shorter knob might be the right compromise. It...
- Thu Mar 17, 2022 2:46 am
- Forum: MR2 MK2 1990 - 1999 NA & Turbo
- Topic: Hub centre bore ... 60.00 or 60.10?
- Replies: 2
- Views: 952
Re: Hub centre bore ... 60.00 or 60.10?
Thanks you sir!
Thought I had it right but it's always best to check I find.
Thought I had it right but it's always best to check I find.
- Wed Mar 16, 2022 6:47 pm
- Forum: MR2 MK2 1990 - 1999 NA & Turbo
- Topic: Hub centre bore ... 60.00 or 60.10?
- Replies: 2
- Views: 952
Hub centre bore ... 60.00 or 60.10?
As per the title really.
Can anyone confirm the mk2 hub is a 60.1mm centre bore and 5 x 114.3 hole pattern.
I'm thinking of changing my 15mm rear spacers for 12mm or 10mm instead and can't remember what the specs are
Many thanks
Can anyone confirm the mk2 hub is a 60.1mm centre bore and 5 x 114.3 hole pattern.
I'm thinking of changing my 15mm rear spacers for 12mm or 10mm instead and can't remember what the specs are
Many thanks
- Wed Oct 20, 2021 2:09 pm
- Forum: Mechanical
- Topic: Diagram of the door window mechanism?
- Replies: 2
- Views: 1351
Diagram of the door window mechanism?
Hi all, hoping this finds everyone happy and healthy. I currently have a drivers side window that is just starting to rattle a little when at certain places when part open. Doesn't do it whilst fully up or down so not too much of an issue just yet but I'd like to have the car as perfect as I can get...
- Sat Sep 25, 2021 5:37 pm
- Forum: Mechanical
- Topic: Sticking calliper/handbrake ... help!
- Replies: 1
- Views: 1161
Sticking calliper/handbrake ... help!
Evening all. So back with another question for you. I've just had a full service carried out and a good checkover ahead of the MOT in a month or so. The upshot is I have a sticking rear n/s calliper due I'm told to the mechanical mechanism of the handbrake not properly freeing itself off. After a de...
- Tue Aug 24, 2021 2:04 pm
- Forum: Mechanical
- Topic: How to check gearbox oil level?
- Replies: 6
- Views: 1423
Re: How to check gearbox oil level?
Hi Brian and thanks for the response... again. I think it likely now I'll leave everything 'standard' rather than change to the Eibachs .... if I keep the car another decade or so I'm sure by then there will be enough sag in the springs to bring it back to how it looked when I bought it 5 years ago....
- Mon Aug 23, 2021 11:04 am
- Forum: Mechanical
- Topic: How to check gearbox oil level?
- Replies: 6
- Views: 1423
Re: How to check gearbox oil level?
Thanks Toxo.... you're a star. Now if you can answer my questions about the Eibach springs with standard shocks in the mods section as well.... Is it me or does it seem there aren't anywhere near as many active members here as there were when I had my old white Rev1 (that's going back 6 or 7 years a...
- Mon Aug 23, 2021 9:43 am
- Forum: Mechanical
- Topic: How to check gearbox oil level?
- Replies: 6
- Views: 1423
How to check gearbox oil level?
As per the title really. When I've watched Wheeeler Dealers it seems to often be a case of just filling until it comes out of an 'overflow' then plugging the overflow but I've no idea if that's right for my car .... a UK Mk2 Rev1 but with a recent replacement sump without the standard 'automatic' le...
- Thu Aug 19, 2021 7:19 pm
- Forum: Modifications
- Topic: [Mk2] [Generic] Eibach Springs ... with standard struts?
- Replies: 2
- Views: 4163
[Mk2] [Generic] Eibach Springs ... with standard struts?
Howdy all, hoping this finds you well. I recently (2 years ago now) refreshed all my front suspension with genuine Toyota bits other than the top mounts (TRD) and the springs ('standard' replacements from TCB since Toyota apparently just don't make them anymore). In due course and probably now next ...
- Tue Jul 06, 2021 3:10 pm
- Forum: Mechanical
- Topic: [Mk2] [Turbo] Gearbox Speed Sensor : 33403-19476
- Replies: 3
- Views: 1806
Re: [Mk2] [Turbo] Gearbox Speed Sensor : 33403-19476
I'd try the usual suspects for parts..
TCB parts
MR2 Ben
Fensport
Rogue Motorsport
If not then try putting an alert onto some 24/7 spares sites as there are bound to be 2s being broken in less specialist garages/breakers.
Good luck.
TCB parts
MR2 Ben
Fensport
Rogue Motorsport
If not then try putting an alert onto some 24/7 spares sites as there are bound to be 2s being broken in less specialist garages/breakers.
Good luck.
- Fri Jun 25, 2021 10:48 am
- Forum: MR2 MK2 1990 - 1999 NA & Turbo
- Topic: Hose/hoses from hell
- Replies: 3
- Views: 2127
Re: Hose/hoses from hell
If it were me I'd phone around the usual suspects...
Fensport
MR2 Ben
TCB parts
Fensport
MR2 Ben
TCB parts
- Tue Jun 22, 2021 11:04 pm
- Forum: Mechanical
- Topic: [Mk2] [Generic] Sticking caliper handbrake lever ... any fix?
- Replies: 6
- Views: 2073
Re: [Mk2] [Generic] Sticking caliper handbrake lever ... any fix?
So it is a new (or recon) calliper then?
There's no way to address the 'lever' issue short of actually reconditioning the whole thing?
Oh well! The awkward thing is I'll now have to try to match the calliper paint I used all those years ago .... or repaint them all!
There's no way to address the 'lever' issue short of actually reconditioning the whole thing?
Oh well! The awkward thing is I'll now have to try to match the calliper paint I used all those years ago .... or repaint them all!