www.imoc.co.uk

Im using a turbo pressure plate and N/A friction plate in mine.

Has or does anyone know which chrome handle is the best fit for an mk2?

Ie: avensis/corolla

Can someone enlighten me on the unused plugs on my 92 N/A?

There is one on the timing belt cover near the vent fan.

Two near the coil pack on the rear boot wall.

Ine hanging down near the expansion tank.

Thanks Pete, whilst i don't get continuity between them the relay does click so the coil must work.

So the only thing left for my batt charge light is the alternator regulator.

Hi all can somebody test their IGN relay for cotinuity between terminals 1&3 (the outside two in the row of 3)

The bgb says they should have but i dont get continuity nor do i on the other two relays in the frunk fuse box. Just wondering if its an error in the bgb.

No i didnt i asked for replacement bulbs.

It's ok i've now found a supplier for them.

Just google

3mm 14v micro bulb

You want 0.7w or 1.2w

The silicone coloured covers are available on ebay.

Yeah i can get the part numbers off toyodiy, i want replacement bulbs for them.

But its correct all the switches dont light up, only ignition ring and clocks light up, so front/rear fog, headlight leveler, hazard and cig lighter dont light up

All of them

Hi all whats the best replacement for blown bulbs in switches the ones in brown holder and rubber holders?

I got some wire filament bulbs from Maplin but they are too big.

If anything if they pushed it out it would line up better.

Ill take a pic.

Yeah bashed it to clear the reverse lights. When looking down from the top the panel does not sit flush with the lip of the boot.

Just a quick question,

When converting a rev2 to rev3 lights should the centre panel sit flush with the boot as my boot overhangs by 1/4 inch or so?

Ive just fitted them to uk Gt its easy enough to do.

Ok, ive checked all fuses and put multimeter on to see.

I get about 13-14v stabilizing at 13.8 on tickover. With load it drops to 12.5v.

My dash lights dont go out though any ideas?

Hi all, im trying to fit my kenwood stereo which i have done using the brackets etc but it sits flush with the dash so i cant fit yhe surround trim to it, what have others done?

Has anybody fitted steering fogs to a uk car?

Cheers at least i can stop looking for a code now!

Okay i shall check tomorrow.

Thanks