www.imoc.co.uk

Just out of interest does the plastic for the seatbelt loop at top of b pillar discolour over time. I only ask as I'm going to replace mine as they are green on top I assumed this was overspray from a past paint job but when I search eBay etc there are a lot of pairs with the same green on top.

What about using a hub centric spacer to clear the brakes?, you could keep your existing wheel.

. - Dawesy (MR2OC - front) 2. - Madmr2man (MR2OC - front) 3. - Jacktempleman (MR2OC - Front and Rear) 4. - Samreedy (MR2OC - front and rear) 5. - Paul Woods (MR2OC - front) 6. - Scott Barton (IMOC - front) 7. - jcurtis (MR2OC - front) 8. - Chumbaside (IMOC - front) 9. - StuMR2lee (MR2OC - front) 10....

Also trying to find out is there and difference between the abs and non abs brake mc?

Could someone point me in the right direction , I am pretty sure my bmc has given up I have Rev 3 brakes fitted on a Rev 1 turbo with abs so can I just fit a Rev 3 turbo bmc. Also do I need to change the servo or will it bolt on my Rev 1 servo. Thanks in advance Dan

pm'd

interested in these where are you located?

Thanks have just ordered hfh from toyota and already have a water pump and tensioner to go in with the cambelt will also look to order the other hose , do you see that much of a benefit from the berk down pipe? was going to keep it stock and maybe knock the guts out of the original cat.
Thanks Dan

Right I have a rev1 turbo and I've pulled the engine out as I'm going to change the timing belt , clutch , drive shaft gaiters as well as having a good look round the engine and doing the usual service items. I think I'm going to end up poly bushing the whole rear end as everything looks old and bri...

thanks for the help tcb parts are supplying all four next day for about £65 all in.

Thanks peter I understand your points but I find it odd that no one lists the outer either with or without the inner Adl blueprint show an inner which is tailored and not universal but no outer.

Can anyone point me in the direction of replacement cv boots for a rev 1 turbo? mr2-ben amongst others list the inners but not the outers? I know the genuine part is superior in this case but im not paying £100 per side for bits of rubber! any help would be appriciated