Search found 927 matches
- Sun May 09, 2021 6:02 am
- Forum: MR2 MK2 1990 - 1999 NA & Turbo
- Topic: Dyno results. 420@ the hubs.
- Replies: 149
- Views: 41546
Re: Dyno results. 420@ the hubs.
You were running that much boost though what CR are you running, also are you changing your CC setup?
- Fri Dec 18, 2020 6:05 pm
- Forum: Modifications
- Topic: [Mk2] [Turbo] 800cc Injectors advice
- Replies: 17
- Views: 6431
Re: [Mk2] [Turbo] 800cc Injectors advice
I got my Sard 800cc low impedance from ATS in the US. I got them late 2013
Being running in my car since 2014. No issues
Being running in my car since 2014. No issues
- Fri Dec 18, 2020 6:00 pm
- Forum: MR2 MK2 1990 - 1999 NA & Turbo
- Topic: Locked out!
- Replies: 8
- Views: 4670
Re: Locked out!
Spraying WD40 onto the key and inserting into the keyhole does wonders.
Frees up everything
Frees up everything
- Sun Oct 18, 2020 10:16 pm
- Forum: MR2 MK2 1990 - 1999 NA & Turbo
- Topic: Boot Light Stays On - Switch Location?
- Replies: 5
- Views: 3912
Re: Boot Light Stays On - Switch Location?
First part of my previous post should help you.
- Sun Oct 18, 2020 5:23 pm
- Forum: MR2 MK2 1990 - 1999 NA & Turbo
- Topic: Boot Light Stays On - Switch Location?
- Replies: 5
- Views: 3912
Re: Boot Light Stays On - Switch Location?
If i remember correctly, to the RHS of the boot latch underneath the carpet lining there should be small grey plastic male and female connection. Just unplug that.
This or just take the boot bulb out, very easy to get to get to two seconds job
This or just take the boot bulb out, very easy to get to get to two seconds job
- Fri Jul 31, 2020 11:04 am
- Forum: Member Profiles
- Topic: oVerboost's MR2 GT Rev4
- Replies: 43
- Views: 26436
Re: oVerboost's MR2 GT Rev4
Love the attention to detail you have. Even down to getting rid of the aero wiper blades (One of my pet hates! ) back to OEM. Although not sure I'd have changed the side repeaters
- Thu Jul 23, 2020 9:29 am
- Forum: MR2 MK2 1990 - 1999 NA & Turbo
- Topic: Dyno results. 420@ the hubs.
- Replies: 149
- Views: 41546
Re: Dyno results. 420@ the hubs.
I'm really happy for you Ryan, it's has been a LONG road :clap: I agree with you about the turbo. CT20B is an underrated turbo for what it is. I went from CT20B to a GT3076. Nothing until 4.5rpm. Because of this, I changed to a GTX gen II of the same turbo, like night and day. Was an easy (relativel...
- Thu Jul 02, 2020 3:10 pm
- Forum: MR2 MK2 1990 - 1999 NA & Turbo
- Topic: Dyno results. 420@ the hubs.
- Replies: 149
- Views: 41546
Re: Dyno results. 420@ the hubs.
What a nightmare you've been having mate. Hopefully all will be right in the end What's the full name of your fuel pump? I've got a Walbro, nothing wrong with it the almost 6 years I've had it but it doesn't half whine after a spirited drive. I've learnt to live with it but will be interesting to kn...
- Sun May 24, 2020 9:28 am
- Forum: MR2 MK2 1990 - 1999 NA & Turbo
- Topic: Radiator options
- Replies: 7
- Views: 4374
Re: Radiator options
Jesus wrote:I've bought brand new Genuine Toyota Radiator for my MR2 because is the best radiator for this car.
Where did you buy it from?
- Wed Mar 18, 2020 8:35 am
- Forum: Mechanical
- Topic: [Mk2] [Turbo] Max HP on my setup
- Replies: 6
- Views: 5835
Re: [Mk2] [Turbo] Max HP on my setup
If only it was so easy to say an actual figure. It all depends on the health of your engine, your tuner IAT etc. I'd say you have all the right ingredients for your goal. Your setup it almost like mine barring you have cams. You didn't say your cooling setup. I've got the Gen II GTX 3076r, but i wen...
- Sun Feb 23, 2020 3:41 pm
- Forum: Modifications
- Topic: [Mk2] [Turbo] Gen3 3SGTE - best forged piston?
- Replies: 17
- Views: 6390
Re: [Mk2] [Turbo] Gen3 3SGTE - best forged piston?
I'm with Wossner 8.0.1 cr done over 20k miles built 2014. No issues at all. OEM rods It's always the case for BEST reliability lower CR is better sure higher will work but head room is lower for there dreaded detonation. The plus is higher CR is better off boost response and i think absolute power....
- Fri Feb 21, 2020 6:09 pm
- Forum: Modifications
- Topic: [Mk2] [Turbo] Gen3 3SGTE - best forged piston?
- Replies: 17
- Views: 6390
Re: [Mk2] [Turbo] Gen3 3SGTE - best forged piston?
I'm with Wossner 8.0.1 cr done over 20k miles built 2014. No issues at all. OEM rods It's always the case for BEST reliability lower CR is better sure higher will work but head room is lower for there dreaded detonation. The plus is higher CR is better off boost response and i think absolute power. ...
- Sat Feb 15, 2020 11:54 pm
- Forum: MR2 MK2 1990 - 1999 NA & Turbo
- Topic: Any Nardi steering wheel users?
- Replies: 8
- Views: 3812
Re: Any Nardi steering wheel users?
I have a 350mm deep dish. Very nice steering wheel. It will take you a little while to get used to the indicator storks being a little further away.
- Fri Oct 18, 2019 3:16 pm
- Forum: MR2 MK2 1990 - 1999 NA & Turbo
- Topic: My 400whp saga, 373whp after mapping.
- Replies: 236
- Views: 67763
Re: My 400whp saga, 373whp after mapping.
you using a walbro on stock wiring? I'm hoping to get changed back to a regular return line this weekend. I should be able to see consistency through AFR gauge. That seems to swing about all over the place just now as per the erratic pressure. Yes i'm using with stock wiring. Wanted to keep the car...
- Thu Oct 17, 2019 8:17 pm
- Forum: MR2 MK2 1990 - 1999 NA & Turbo
- Topic: My 400whp saga, 373whp after mapping.
- Replies: 236
- Views: 67763
Re: My 400whp saga, 373whp after mapping.
Actually had a message from another member suggesting this. A very very common issue at this power level so I'll get the pump wiring sorted too. The whine drives me absolutely mental haha! It is non stop from the moment you turn on the ignition:( what power are you making and what injectors/rail? I...
- Tue Oct 15, 2019 2:07 am
- Forum: MR2 MK2 1990 - 1999 NA & Turbo
- Topic: My 400whp saga, 373whp after mapping.
- Replies: 236
- Views: 67763
Re: My 400whp saga, 373whp after mapping.
Well done Ryan :thumleft: The walbro whine is not an issue, mine is like that after prolonged spirited driving. It calms down after some normally driving. Took me a while to get used to. Had mine in my car for 5 years now. In my setup, when going for big power, my tuner said the fuel pump power was ...
- Wed Sep 11, 2019 4:24 pm
- Forum: Modifications
- Topic: [Mk2] [NA] Electronic boot release
- Replies: 9
- Views: 5819
Re: [Mk2] [NA] Electronic boot release
Not as fancy as what you're proposing, but i've had a remote boot release built into my Toad alarm for over 10 years, works a treat through a solenoid.
Interested in seeing how yours turns out
Interested in seeing how yours turns out
- Wed Sep 11, 2019 4:14 pm
- Forum: MR2 Engine Swaps
- Topic: The Grey Phoenix..Summer update
- Replies: 86
- Views: 65185
Re: The Grey Phoenix..Summer update
How are you getting such high numbers and low boost compared to mine?
Congraz btw
I'm on a 2 litres with a gen 2 3076r and i get 430 at 1.9bar with wmi
6.3ar.
I see no downside to your setup, it even spools pretty well.
Spill
Congraz btw
I'm on a 2 litres with a gen 2 3076r and i get 430 at 1.9bar with wmi
6.3ar.
I see no downside to your setup, it even spools pretty well.
Spill
- Fri Aug 16, 2019 10:57 am
- Forum: MR2 MK2 1990 - 1999 NA & Turbo
- Topic: My 400whp saga, 373whp after mapping.
- Replies: 236
- Views: 67763
Re: My 400whp saga, 373whp after mapping.
You're doing a lot better than me mate. My car has been with my bodyshop since January, an almost restoration job.
I hope to get it back this weekend
Your paint finish looks very interesting
I hope to get it back this weekend
Your paint finish looks very interesting
- Tue Jul 23, 2019 1:37 am
- Forum: Mk2
- Topic: MR2 Rev 3 Turbo ECU 89661-17460
- Replies: 0
- Views: 1856
MR2 Rev 3 Turbo ECU 89661-17460
Came off my car in good working order and has been stored indoors ever since. I'm now using a Link G4, hence why this is for sale These are around the £300 mark and i will let mine go for £250 plus postage Note - Only the ECU is for sale, the injectors are not included https://i.imgur.com/0NC9EMn.jpg